Bollards Plus 60-inch tall by 4-inch diameter Heavy Duty Inground Bollards are high-performance barriers designed to protect areas at high risk of damage or injury due to heavy vehicle traffic. Made from Schedule 40 Carbon Steel Pipe, these bollards feature thick, Heavy Duty walls that are typically filled with concrete during installation to reinforce their stability and maximize safety. Their slimmer profile makes them ideal for locations such as drive-thru lanes, gas station pumps, and other areas where larger diameter bollards may not be feasible, but safety remains a top priority. Finished in a brilliant High Visibility Safety Yellow using our Epoxy Urethane Paint System, each bollard is blasted, primed, and glossed to remain vibrant and visible throughout all types of weather conditions without the need for constant maintenance. A variety of colors are available at no extra cost along with additional customizations to guarantee all project needs are met. 

Ideal for high-traffic areas such as pedestrian walkways, public access areas, and gas stations, Bollards’ Plus 4-inch diameter by 60-inch tall Heavy Duty Inground Bollards are manufactured from Schedule 40 Carbon Steel and serve as effective barriers to reduce vehicular and property damage. These bollards can be installed 12-inches to 24-inches below ground and are traditionally filled with concrete upon installation, enhancing their structural integrity and impact resistance. These bollards are naturally bare, with no finish, allowing the freedom to increase aesthetics with 5" diameter Stainless Steel or Plastic bollard covers or leave them as is for a minimalistic finish. While our Inground Bollards are not manufactured with a default cap, optional flat, dome, or wet-set caps are available to suit project preferences. Additionally, customizations such as material type and additional accessories including reflective tape or chain loop receivers are also available, ensuring each bollard is tailored to meet the exact needs of your project.

Our 72-inch tall by 4-inch diameter Heavy Duty Inground Bollards are fabricated from Schedule 40 Carbon Steel for increased wall thickness and enhanced durability. These high-performance bollards are traditionally filled with concrete during installation to provide maximum strength and enhanced impact resistance, making them ideal solutions for areas with slow-moving traffic and high vehicle density such as bank drive-thru lanes, ATMS’, and outdoor seating zones. Each bollard is prepped using our Epoxy Urethane Paint System, then coated in a vibrant, High-Visibility Safety Yellow that not only enhances functionality but delivers a clean, professional aesthetic that holds up in all weather conditions. While our Inground Bollards do not include a default cap, we offer a variety of customization including wet-set caps, reflective tape, chain loops, and multiple finish types to ensure that your bollards meet the exact specifications of your project while enhancing performance and longevity.

Bollards Plus 4-inch diameter by 72-inch tall Heavy Duty Inground Bollards are barriers designed to protect areas that are at higher risk due to slow-moving, heavy vehicle traffic. Made from Schedule 40 Carbon Steel Pipe, these bollards are typically filled with concrete when installed to reinforce their strength and stability, delivering high-performance barriers that effectively line and enforce safety parameters. Their slimmer profile makes them ideal for locations such as drive-thru lanes, gas station pumps, and other areas where larger diameter bollards may not be feasible, but safety remains a top priority. These bollards have a natural Bare Steel finish making it easy to upgrade with Stainless Steel or HDPE Plastic bollard covers, offering flexibility when aesthetic plans are not yet determined. Additionally, we offer many customizable options such as your choice of adding a cap style and reflective tape to ensure no details are missed or overlooked.

Taller bollards provide increased visibility and reliability in environments where shorter bollards may not emphasize necessary safety parameters to larger vehicles and equipment. Our 84-inch tall, 4-inch diameter Heavy Duty Inground Bollards help define clear boundaries while being a cost-effective solution that is designed for strength and versatility. Ideal for protecting areas vulnerable to vehicular damage such as streetscapes, museums, and fuel storage sites, these bollards are constructed from Schedule 40 Carbon Steel and are commonly filled with concrete during installation to further reinforce and maximize their durability. Primed and coated using our Epoxy Urethane Paint System, our bollards are finished with a High Viability Safety Yellow for a fade-free, rust-free lifespan. Additional customizable finishes including powder coat, galvanized, or painted and primed are available in a wide variety of custom colors to pick from at no extra cost to meet project specifications and aesthetic requirements.

Our 84-inh diameter by 84-inch tall Heavy Duty Inground Bollards are fabricated from Schedule 40 Carbon Steel pipe and are traditionally filled with concrete during installation to maximize strength and enhance impact resistance. Ideal for areas with slow-moving, high vehicle traffic such as storefronts, drive-through lanes, and business parks, these taller barriers offer a more visible marker for areas that need defined safety parameters, but may not be as noticeable if shielded by shorter bollards. Each bollard is left bare, with no finish, offering a flexible approach to keep it sweet and simple or upgrade with Stainless Steel or HDPE Plastic covers once project specifications are finalized. While our Inground Bollards do not include a default cap, we offer a variety of customization including various add-on cap options, accessories, and multiple finish types to ensure that your bollards meet the exact specifications of your project while enhancing performance and longevity.

Ideal for high-traffic areas such as pedestrian walkways, public access areas, and gas stations, these 96-inch by 4-inch diameter Heavy Duty Inground Bollards are manufactured from Schedule 40 Carbon Steel and serve as effective barriers against vehicular damage. These bollards can be installed 12-inches to 24-inches below ground and are traditionally filled with concrete during installation to maximize their structural integrity and impact resistance. Our Epoxy Urethane Paint System ensures a long-lasting, rust and fade resistant coat while the High Visibility Safety Yellow Finish not only enhances aesthetics but ensures visibility in all conditions. While our Inground Bollards are not manufactured with a default cap, optional flat, dome, or wet-set caps are available to suit project preferences. We also offer full customizations of height, material type, and additional accessories to ensure each bollard is tailored to meet the exact needs of your project.

Ideal for protecting areas that need clear and defined safety parameters such as streetscapes, museums, and fuel cages, our 4"x96" Heavy Duty Inground Bollards provide increased visibility and reliability in environments where shorter bollards may not emphasize necessary safety parameters to large vehicles and equipment. These taller bollards are constructed from Schedule 40 Carbon Steel and are commonly filled with concrete during installation to further reinforce and maximize their durability, delivering a cost-effective solution that is designed for strength and versatility. Left with a Bare Steel finish, these bollards grant the option to appreciate their natural finish or apply a 5" diameter Stainless Steel or HDPE Plastic bollard cover to increase appeal. Additionally, we offer customizable features such as wet-set or low-profile add-on caps and powder coat, galvanized, or painted and primed finishes that are available in a wide variety of custom colors to pick from at no extra cost.

Bollards Plus 60-inch tall by 5-inch diameter Heavy Duty Inground Bollards are manufactured from Schedule 40 Carbon Steel Pipe, making them a versatile and flexible solution for building premises, highway lanes, and parking lots. These Inground Bollards are typically filled with concrete during installation to reinforce their strength and impact resistance, offering a more reliable and cost effective alternative to Surface Mounted Bollards. Each bollard is blasted and primed using our Epoxy Urethane Paint system before coated with a High Visibility Safety Yellow, guaranteeing a bold, low maintenance finish that is sure to stand out in any environment. These aspects help enhance driver awareness by defining and clearly marking boundaries to reduce the risks of damage and injuries. Optional wet-set caps are available for added reinforcement, along with customization features such as galvanized, powder coated, or bare finishes, reflective tape, or chain attachments to meet the specific and unique needs of any project.

These 60-inch tall by 5-inch diameter Heavy Duty Inground Bollards are manufactured from Schedule 40 Carbon Steel Pipe, offering a remarkable, durable barrier against vehicular impact. Designed to deliver high-level protection, our bollards can be installed anywhere from 12-inches to 24-inches below ground and are commonly filled with concrete during installation to utilize and reinforce their safeguarding duties. Versatile, dependable, and cost-effective, these bollards are well-suited for protecting loading docks, storefronts, and outdoor seating areas. Completed with a natural Bare finish, each bollard offers the flexibility to upgrade its aesthetic with any 6” diameter Stainless Steel or HDPE plastic cover especially if project specifications are not definite or leave as is for ease and natural beauty. Our bollards are completely customizable, offering features such as anchor types including embed plates and nelson studs, steel flat or wet-set cap options, and reflective tape add-ons upon request.

These 72-inch tall by 5-inch diameter Heavy Duty Inground Bollards are manufactured from Schedule 40 Carbon Steel Pipe, offering a remarkable, durable barrier against vehicular impact. Designed to deliver high-level protection, they can be installed anywhere from 12-inches to 24-inches below ground and are commonly filled with concrete during installation to utilize and reinforce their safeguarding duties. Versatile, dependable, and cost-effective, these bollards are well-suited for protecting loading docks, storefronts, and outdoor seating areas. Each bollard is blasted and primed using our Epoxy Urethane Paint System, then painted with a bold High-Visibility Safety Yellow or if preferred, any custom color at no extra cost to meet your project’s aesthetic. This long-lasting coating not only draws attention to critical safety zones but also resists rust and fading, preserving its shine and effectiveness through harsh weather and heavy use without any extra work or maintenance. 

Bollards Plus 5”x72” Heavy Duty Inground Bollards are manufactured from Schedule 40 Carbon Steel Pipe, making them a versatile and flexible solution for building premises, highway lanes, and parking lots. These Inground Bollards are typically filled with concrete during installation to reinforce their strength and impact resistance, offering a more reliable and cost effective alternative to Surface Mounted Bollards. Each bollard has a natural, bare finish, that offers a straightforward way to mark and enforce safety parameters while allowing the flexibility to add a Stainless Steel or Plastic Bollard cover for increased appeal, ideal for projects that may not have finalized aesthetic specifications. Optional wet-set caps are available for added reinforcement, along with customizable features such as galvanized, powder coated, or primed and painted finishes, reflective tape, or chain attachments to meet and exceed the specific and unique needs of any project.

Ideal for areas that require clearly defined boundaries and restricted access zones such as warehouses, factories, and industrial areas, these 84-inch tall by 5-inch diameter Heavy Duty Inground Bollards offer robust, resilient protection. Manufactured from Schedule 40 Carbon Steel Pipe, these bollards are installed 12 to 24 inches below ground and are typically filled with concrete during installation to enhance overall durability and stability. To ensure a long-lasting, low maintenance finish, each bollard is blasted for optimal paint adhesion, primed using our Epoxy Urethane Paint System, and coated with a rust-free, fade-free High Visibility Safety Yellow that enhances awareness and alerts drivers to their surroundings. Fully customizable, we offer a variety of colors at no extra cost along with additional customizations such as galvanized, bare, powder-coated finishes, optional caps, and accessories including reflective tape and chain loop receivers, delivering performance tailored to your specific needs. 

Our 84” tall by 5” diameter Heavy Duty Inground Bollards are made from Schedule 40 Carbon Steel pipe and are installed 12-inches to 24-inches below ground, typically with a concrete filling to further reinforce strength and impact resistance. These bollards mark clear boundaries, offering outstanding protection to large and tall machinery, trash compactors, and hazardous restricted zones. Each bollard is left with its natural, bare finish, offering the ability to establish clear and necessary safety parameters without needing to make an immediate decision on color or finish, especially if a definitive answer has not been reached. Aesthetic appeal can always be customized with 6” diameter Stainless or Plastic Bollard Covers, or for ease and simplicity, leave as is. Additional customizations such as schedule 10 or 80 wall thicknesses, stainless steel material, and optional accessories are available to ensure that your safety barriers exceed all expectations.

Our 96” tall, 5” diameter Heavy Duty Inground Bollards are made from Schedule 40 Carbon Steel pipe and are installed 12-inches to 24-inches below ground, typically with a concrete filling to further reinforce strength and impact resistance. These bollards mark clear boundaries, offering outstanding protection to large and tall machinery, trash compactors, and hazardous restricted zones. To ensure long-lasting color and durability, each bollard is blasted to utilize paint adhesion and then primed and glossed using our Epoxy Urethane Paint System. They’re finished with a brilliant High Visibility Safety Yellow that alerts vehicles and pedestrians to their surroundings with minimal maintenance or upkeep required. If our default Yellow does not suit your needs, we offer a variety of colors at no added cost to help create your ideal bollard. Additional customizations like galvanized, bare, or powder coated finishes, material type and height, and optional accessories are available to ensure that your safety barriers exceed all expectations. 

Ideal for areas that require clearly defined boundaries and restricted access zones such as warehouses, factories, and industrial areas, these 96-inch tall by 5-inch diameter Heavy Duty Inground Bollards offer robust, resilient protection. Manufactured from Schedule 40 Carbon Steel Pipe, these bollards are installed 12 to 24 inches below ground and are typically filled with concrete during installation to enhance overall durability and stability. Each bollard is left bare, with no finish, offering a practical and versatile alternative to lining crucial safety parameters with colored or finished bollards. Once requirements have been finalized, these bollards can be aesthetically enhanced by stainless steel or HDPE plastic bollard covers. We offer additional customizations such as galvanized, powder-coated, or primed and painted finishes with custom colors at no added cost and optional low profile, wet-set, or steel flat caps, delivering performance tailored to your specific needs.

Standing 60 inches tall with a 6 inch diameter, these Heavy Duty Inground Bollards are made from Schedule 40 Carbon Steel, featuring robust walls that are typically reinforced by a concrete filling. Built to meet and exceed safety standards, these bollards offer reliable protection against vehicular threats, including high-impact incidents such as ram-raid thefts at storefronts and commercial centers. Beyond physical defense, they also serve as prominent visual deterrents, ideal for lining fire lanes, high-risk zones, and restricted access areas. To deliver long-term performance with minimal upkeep, each bollard undergoes blasting to ensure optimal paint adhesion before being primed with our premium Epoxy Urethane Paint System. The result is a radiant High Visibility Safety Yellow finish that resists fading and chipping to maximize safety awareness. Fully customizable, these bollards are available in a powder coat or galvanized finish and can feature optional accessories like wet-set caps, tailored to deliver professional-grade protection with long-lasting visual impact.

These 6"x60” Heavy Duty Inground Bollards are manufactured from Schedule 40 Carbon Steel Pipe and are commonly filled with concrete during installation to reinforce their strength and reliability. Our bollards help mark and enforce safety parameters for emergency access zones, restricted areas, and sensitive entry points. They also make great organization and security solutions for parking lots by defining vehicle paths, entrances, and exits, ensuring a smooth and safe experience. Each bollard delivers a natural, bare steel finish that grants the freedom to upgrade its appeal in the future with 7" diameter Stainless or HDPE Plastic Bollard Covers, an adaptable option for project’s whose aesthetic design are continuously evolving or have not yet been determined. We offer additional customizable options such as a variety of anchor types, add-on caps, and accessories to choose from, delivering exceptional and easy to maintain safety barriers that are built to your expectations.

Ideal for high-traffic environments that need strength, safety, and durability, Bollards Plus 72-inch-tall, 6-inch-diameter Heavy Duty Inground Bollards deliver cost-effective protection to reduce damage risks and injury. Typically filled with concrete upon install to increase their strength and impact resistance, these Schedule 40 Carbon Steel bollards help mark and enforce safety parameters for emergency access zones, restricted areas, and sensitive entry points. They also make great organization and security solutions for parking lots by defining vehicle paths, entrances, and exits, ensuring a smooth and safe experience. Each bollard is primed and glossed before finished with a vibrant, fade-resistant High Visibility Safety Yellow. If our default High Visibility Safety Yellow does not suit your project requirements, we offer a variety of custom colors at no added cost and provide additional customizations such as primed and bare, galvanized, or powder coated finishes, cap styles, and accessories, delivering safety that is tailored to your specific needs.

These 6-inch by 72-inch tall Heavy Duty Inground Bollards are made from Schedule 40 Carbon Steel, featuring robust walls that are typically reinforced by a concrete filling when installed. Our bollards are built to meet and exceed safety standards, offering reliable protection against vehicular threats, including high-impact incidents such as ram-raid thefts at storefronts and commercial centers. Beyond physical defense, they also serve as prominent visual deterrents, ideal for lining fire lanes, high-risk zones, and restricted areas. Each bollard is left naturally bare, making them a great alternative to colored and finished bollards for projects that need a more adaptable bollard until designs and requirements have been finalized. Fully customizable, these bollards are available with a Schedule 10 or 80 wall thickness, an embed height of 12-inches to 24-inches, and welded (single or double) chain loop receivers to deliver professional-grade protection with long-lasting impact. 

Our 84 inch tall, 6 inch diameter Heavy Duty Inground Bollards deliver protection in environments where standard-height bollards may fall short, especially in areas where taller vehicles, trucks, or equipment require higher visual markers for awareness and safety. Manufactured from Schedule 40 Carbon Steel, these bollards are well-suited for warehouses and factories, where they help protect valuable assets, heavy machinery, and personnel from accidental collisions or operational hazards. Each bollard is primed and coated in our signature High Visibility Safety Yellow, ensuring a bold, radiant finish that not only enhances visibility but reinforces awareness and promotes a secure, well-regulated environment. To meet the aesthetic preferences, our Inground Bollards can be finished with various color options at no extra cost. We also offer additional customizations such as add-on features including reflective tape and chain loop receivers to align with your safety protocols, offering both protection and peace of mind where it matters most.

Bollards Plus 6-inch-diameter by 84-inch tall Heavy Duty Inground Bollards are ideal for high-traffic environments that require a taller safety solution to create awareness for large vehicles and machinery, delivering reinforced protection at a competitive price. Typically filled with concrete upon installation to increase their strength and impact resistance, these Schedule 40 Carbon Steel bollards are an outstanding solution to mark and enforce necessary boundaries while shielding areas such as landscapes, overhead doors, and hazardous areas, reducing the risks of property damage. Left with a natural, bare finish, these bollards grant flexibility especially to projects that may not have a definitive aesthetic direction, allowing for future upgrades with 7-inch diameter Stainless or Plastic Bollard Covers. Additional customizable features including primed and painted, galvanized, or powder coated finishes, cap styles such as wet-set or low profile, and accessories like reflective tape are available for selection.

These 96-inch tall, 6-inch diameter Heavy Duty Inground Bollards are manufactured from Schedule 40 Carbon Steel Pipe and are commonly filled with concrete during installation to reinforce their strength and reliability. Our taller barriers offer outstanding protection for landscapes, overhead doors, and high voltage or hazardous areas, marking clear boundaries for larger vehicles and machinery. Primed and glossed using our Epoxy Urethane Paint system, each bollard is guaranteed to remain bright and radiant with our default, High Visibility Safety Yellow finish. However, they can be tailored to match any aesthetic and come with additional customizable finishes such as bare and primed, galvanized, or powder coated along with optional cap styles and accessories. No matter what your ideal safety barrier looks like, we’ve got you covered ensuring that each one reduces the risk of damage and injury to deliver and exceed safety expectations while remaining easy to maintain throughout any environment. 

Our 96-inch tall, 6-inch diameter Heavy Duty Inground Bollards deliver protection in environments where higher visual markers are required for optimal awareness and safety. Manufactured from Schedule 40 Carbon Steel, these bollards are well-suited for warehouses and factories, helping protect valuable assets, heavy machinery, and personnel from accidental collisions or operational hazards. These bollards have a bare steel finish, allowing projects to move forward without delaying decisions on color or finishes. Once more definitive design specifications have been made, a more elegant finish can be added with 7” diameter Stainless Steel or HDPE Plastic bollard covers or leave them as is for a more industrial finish. We also offer additional customizations such as stainless steel pipe material and anchor types including welded, through holes, embed plates, or nelson studs to align with your safety protocols, offering both protection and peace of mind where it matters most.

Bollards Plus 60-inch tall by 8-inch diameter Heavy Duty Inground Bollards are built with versatility in mind, making them suitable for any project. They can be used to protect building entrances while also being utilized as signposts to designate parking, pickup, and handicapped zones. Fabricated from Schedule 40 Carbon Steel, these bollards are generally filled with concrete during installation to add to their durability and stability, increasing overall function. Using our Epoxy Urethane Paint System, each bollard is coated with a High Visibility Safety Yellow that has a long-lasting rust-free and fade-free lifespan, guaranteed to alert pedestrians and drivers to their surroundings without any extra maintenance. Our bollards can be painted to match any color requirement and come with a variety of additional customizations such as accessories including reflective tape and chain loop receivers, height and pipe material, and primed and bare, galvanized, or powder coated finishes, ensuring all requirements are exceeded. 

Manufactured from Schedule 40 Carbon Steel Pipe, our 8-inch diameter, 60-inch tall Heavy Duty Inground Bollards are an excellent solution to establish effective boundaries while offering reliable protection. Typically installed with concrete upon installation for reinforced strength and durability, these bollards can be used to protect building entrances while also being utilized as signposts to designate parking, pickup, and handicapped zones. These bollards have a natural bare finish, offering an easy method to safeguard necessary areas without having to make immediate color or finish decisions. This provides the opportunity for later upgrades using 9” diameter Stainless Steel or HDPE Plastic Bollard covers or leaving them as is for a more rustic look. Additional customizations such as finish types like galvanized, powder coated, or primed and painted, Carbon or Stainless steel bollards, and accessories like welded chain loop receivers are available to ensure safety is delivered to your exact needs.

Made from Schedule 40 Carbon Steel Pipe and typically filled with concrete during installation, Bollards Plus 8" diameter by 72” tall Heavy Duty Inground Bollards provide protection to storefronts in the case of vehicular damage, further decreasing the risks of injury or damage that could result in costly repairs and expenses. These bollards also deliver a helpful solution to block off areas prioritized for emergency access such as EMT entrances or Fire Department Connections (FDC) located on or around buildings. Finished with a High Visibility Safety Yellow, each bollard is primed and glossed using our Epoxy Urethane Paint System to ensure a vibrant and visible coating without any necessary maintenance. If our High Visibility Safety Yellow does not fit your vision, we offer a variety of colors to uphold and match that vision with additional customizable options available including bare, galvanized, or powder coated finishes and different cap styles and accessories to build your perfect safety barrier.

These 8”x72” Heavy Duty Inground Bollards are cost-effective barriers that utilize protection while defining and enforcing necessary safety parameters. Composed of Schedule 40 Carbon Steel Pipe and typically installed with concrete at installation to reinforce strength and stability, our bollards are perfect for shielding storefronts in the case of vehicular damage and helping reduce the risks of costly repairs and expenses. They also deliver a helpful solution to block off areas prioritized for emergency access such as EMT entrances or Fire Department Connections (FDC) located around buildings. Due to their bare steel finish, these bollards can be left as is for a simplistic and industrial look or they can be enhanced using Stainless Steel or Plastic Bollard covers for a more elegant and polished appearance. Customizable options such as primed, galvanized, or powder coat finishes and anchor types such as nelson studs or embed plates are available for selection. 

These Heavy Duty Inground Bollards, standing at a height of 84-inches with an 8-inch diameter, are cost-effective barriers that utilize protection while defining necessary safety parameters. Composed of Schedule 40 Carbon Steel Pipe and typically installed with a concrete filling to reinforce strength and stability, these bollards are outstanding visual markers that enhance security measures for dumpster receptacles, large and tall equipment in warehouses or factories, and powerhouses. Each bollard is blasted to maximize paint adhesion and painted with a brilliant and glossy High Visibility Safety Yellow, guaranteeing a long-lasting, low maintenance finish that will always alert pedestrians and drivers to their surroundings. A wide variety of colors are offered at no extra cost if our default High Visibility Safety Yellow does not match your project design and additional customizable options including galvanized, powder coated, or bare finishes, reflective tape, and cap styles are available to exceed your project requirements.

Made from Schedule 40 Carbon Steel Pipe and typically filled with concrete during installation for reinforced strength, Bollards Plus 8” diameter by 84” tall Heavy Duty Inground Bollards are outstanding visual markers that clearly line and define security measures near dumpster receptacles, large and tall equipment in warehouses or factories, and powerhouses. Left naturally bare with no finish, these bollards offer a versatile starting point for projects that are still in the process of finalizing design appearances, allowing them to move forward with necessary safety precautions and upgrading aesthetics in the future with 9-inch diameter Stainless Steel or Plastic bollard covers. If our traditional bollard does not meet project requirements, we offer many additional customizable options such as embed heights between 12-inches to 24-inches, low-profile, steel flat, and wet-set cap-styles, and schedule 10 or 80 wall thicknesses to build your perfect safety barrier. 

Manufactured from Schedule 40 Carbon Steel Pipe, our 96-inch tall, 8-inch diameter Heavy Duty Inground Bollards are an excellent form of protection against vehicle and equipment damage. Typically installed with a concrete filling, these taller bollards offer more coverage to areas where large machinery needs to be restricted, such as power storages and electrical units reducing danger, damage, and injuries. Primed and glossed using our Epoxy Urethane Paint System, each bollard is finished with a brilliant High Visibility Safety Yellow to ensure that these protective coatings remain radiant and visible regardless of their setting. If our High Visibility Safety Yellow is not the ideal color for your design, we have several colors to pick from at no added cost. We also offer additional customizations such as finish types like galvanized, bare, or powder coated, material type, and welded chain loop receivers to ensure we deliver safety and peace of mind tailored to your exact needs.

Bollards Plus 8-inch by 96-inches tall Heavy Duty Inground Bollards are built with versatility in mind, making them a cost-effective solution to line safety parameters and reduce damage risks. These taller bollards offer more visibility, increasing surrounding awareness to areas where large machinery needs to be restricted, such as power storages and electrical units. Fabricated from Schedule 40 Carbon Steel, these bollards are generally filled with concrete during installation to enhance durability and stability. Completed with a natural bare finish, our bollards grant the flexibility to move forward with necessary protective measures and make aesthetic upgrades with Stainless Steel or HDPE Plastic Covers, when and if project requirements are looking for a specific appearance. We offer a variety of additional customizations such as accessories including reflective tape and single or double welded chain loop receivers and options for Carbon or Stainless steel bollards to ensure all requirements are exceeded. 

Our 5”x60” Extra Heavy Duty Inground Bollard provides a thick and robust barrier that helps highlight and enforce safety parameters while defending against vehicular damage such as ram-raids. These bollards are made from XS Schedule 80 Steel pipe and are typically filled with concrete upon installation for reinforced strength and durability, perfect for shielding dangerous areas such transformers or powerhouses, restricting unauthorized access. These bollards are naturally bare, with no finish, allowing projects the flexibility to leave these bollards as is for simplicity or increase aesthetics with any 6” diameter Stainless Steel or Plastic bollard covers. While our inground bollards do not come with a standard cap, we offer wet-set, steel flat, and low-profile cap options along with other customizable features such as accessories like reflective tape and welded chain loop receivers to ensure no details of these bollards are missed or overlooked.

Bollards Plus 5-inch diameter by 72-inch tall Extra Heavy Duty Inground Bollards are versatile and cost-effective deterrents that are manufactured from Schedule 80 Carbon Steel pipe and commonly filled with concrete when installed to maximize their protection abilities. Ideal for warehouses and factories, our bollards are the perfect safety deterrents to help mark and enforce necessary boundaries, protecting expensive machinery and equipment while reducing damage that may result in costly repairs. Each bollard showcases their natural Bare Steel state, offering an adaptable option for projects that have not yet determined their aesthetic appearance. For a more industrial look, they can be left in their original state, or they can be easily upgraded with Stainless Steel or HDPE Plastic bollard covers for a clean, sleek finish. Additionally, we offer many customizable options such as primed and painted, galvanized, and powder coated finishes as well as various anchor types to select from.

These 5"x84" Extra Heavy Duty Inground Bollards provide increased visibility in environments where shorter bollards may not emphasize necessary safety parameters for large vehicles and equipment, providing a solution that is designed for strength and versatility at a competitive price. These bollards are constructed from Extra Strong Schedule 80 Carbon Steel and commonly are filled with concrete during installation to further reinforce their durability, making them ideal for safeguarding large data servers, chemical plants, and transformers. Left with a Bare Steel finish, these bollards grant the option to appreciate their natural finish or apply a 6" diameter Stainless Steel or HDPE Plastic bollard cover to increase appeal. Additionally, we offer customizable features such as wet-set or low-profile add-on caps and powder coat, galvanized, or painted and primed finishes that are available in a wide variety of custom colors to pick from at no extra cost.

Traditionally filled with concrete during installation to provide maximum strength and enhanced impact resistance, our 5-inch diameter by 96-inch tall Extra Heavy Duty Inground Bollards are fabricated from XS Schedule 80 Carbon Steel pipe. These taller barriers offer a more visible marker to large equipment and machinery that may not be as noticeable if shielded by shorter bollards, making them ideal for warehouses, industrial settings, and dumpster receptacles. Each bollard is left bare, with no finish, offering a flexible approach to display their natural, rustic look or upgrade with Stainless Steel or HDPE Plastic covers once project specifications are finalized. While our Inground Bollards do not include a default cap, we offer a variety of customizations including wet-set caps, reflective tape, chain loops, and multiple finish types to ensure that your bollards meet the exact specifications of your project while enhancing performance and longevity.

Bollards Plus 6-inch diameter, 60-inch tall Extra Heavy Inground Bollards are a reliable barrier, maximizing strength and durability while providing an effective solution to highlight safety parameters. These bollards are manufactured from XS Schedule 80 Carbon Steel and are typically filled with concrete during installation to reinforce protection and impact resistance, making them ideal for industrial settings, machinery protection, and warehouses. These bollards are naturally bare, with no finish, allowing the freedom to increase aesthetics with 7" diameter Stainless Steel or Plastic bollard covers or leave them as is for a minimalistic finish. While our Inground Bollards are not manufactured with a default cap, optional steel-flat, low-profile, or wet-set caps are available to suit project preferences. Additionally, customizations such as your choice of embed height and additional accessories including reflective tape or chain loop receivers are also available, ensuring each bollard is tailored to meet the exact needs of your project.

Made from Extra Strong Schedule 80 Carbon Steel Pipe, our 6-inch diameter by 72-inch tall Extra Heavy Duty Inground Bollards are high-performing barriers that offer a versatile solution for safeguarding transformers, equipment, and expensive machinery at an affordable cost. Typically filled with concrete upon installation to enhance their overall function, these bollards deliver long-lasting protection that effectively lines safety parameters and alerts vehicles and pedestrians of the surrounding environment, helping reduce the risks of damage and costly repairs. Our bollards have a natural Bare Steel finish making it easy to upgrade its appeal with Stainless Steel or HDPE Plastic bollard covers, offering flexibility to projects that aesthetic plans have not yet been determined but are in need of safety parameters. Additionally, we offer many customizable options such as anchor types including nelson studs, embed plates, and through holes as well as low-profile, wet-set, or steel flat cap add-ons.

Our 6”x84” Extra Heavy Duty Inground Bollards provide a thick and robust barrier to help highlight and enforce safety parameters at a competitive price. These bollards are made from XS Schedule 80 Carbon Steel pipe and are typically filled with concrete upon installation for reinforced strength and durability, perfect for shielding large areas such transformers, hazard zones, and data servers, creating awareness while restricting unauthorized access. These bollards are naturally bare, with no finish, allowing projects the flexibility to leave these bollards as is for simplicity or increase aesthetics with any 7” diameter Stainless Steel or Plastic bollard covers. While our inground bollards do not come with a standard cap, we offer wet-set, steel flat, and low-profile cap options along with other customizable features such as accessories like reflective tape and welded chain loop receivers to ensure no details of these bollards are missed or overlooked.

These 6-inch diameter, 96-inch tall Extra Heavy Duty Inground Bollards are cost-effective deterrents that are manufactured from Schedule 80 Carbon Steel pipe and commonly filled with concrete when installed to maximize their protection abilities. Ideal for factories and distribution centers, these bollards are the perfect safety deterrents to help mark and enforce necessary boundaries for large vehicles and equipment in factories, production plants, and near overhead doors, reducing damage risks due to their height. Each bollard is left in their natural Bare Steel state, offering an adaptable option for projects that have not finalized design requirement. For a more industrial look, they can be left in their original state, or their appeal can be easily upgraded with Stainless Steel or HDPE Plastic bollard covers. Additionally, we offer many customizable options such as primed and painted, galvanized, and powder coated finishes, as well as various anchor types to select from.

These powerful and enduring 8-inch by 60-inch tall Extra Heavy Duty Inground Bollards are made from Extra Strong Schedule 80 Steel pipe and are commonly filled with concrete when installed to reinforce their strength and stability. Our bollards are great for defining safety parameters and shielding storefronts or shopping centers to protect against vehicular damage such as ram-raids, that could result in damage, injuries, and costly expenses. Each bollard is bare, with no finish, offering a flexible approach for a minimalist look or the option to upgrade its appearance with 9" diameter Stainless Steel or HDPE Plastic covers once project specifications are finalized. While our Inground Bollards do not include a default cap, we offer a variety of add-on cap options along with customization such as reflective tape, welded single or double chain loop receivers, and different finishes to ensure that your bollards meet your projects specifications while providing long-lasting protection. 

Our 8-inch diameter, 72-inch tall Extra Heavy Duty Inground Bollards provide a reliable and robust deterrent that are great for lining and enforcing safety parameters inside of factories, power plants, and distribution zones to help reduce damage and possible injuries. Manufactured from XS Schedule 80 Carbon Steel Pipe, these bollards are typically filled with concrete upon installation to maximize durability and impact resistance, providing a high-performance barrier at a competitive price. Left with a Bare Steel finish, these bollards offer the flexibility to showcase their natural appearance or enhance its curb appeal with a Stainless Steel or HDPE Plastic bollard cover. Each bollard is fully customizable, with available features like various anchor types including welded round stock, through holes, or nelson studs and embed heights ranging from 12-inches to 24-inches to build a barrier that exceeds your necessary safety standards.

Our 8”x84” Extra Heavy Duty Inground Bollards are strong and sturdy barriers that are usually filled with concrete when installed to enhance overall functionality. Fabricated from XS Schedule 80 Carbon Steel, these bollards are ideal for industrial settings, landscape protection, and cargo bays, delivering a tall visual marker that effectively highlights clear, crucial boundaries and creates awareness for the surrounding environment. These bollards are naturally bare, with no finish, allowing the freedom to upgrade their aesthetic with Stainless Steel or Plastic bollard covers or leave them as is for a more industrial appearance. This is a suitable option for projects that need to enforce safety precautions without having to make immediate decisions on final appearances. We offer many additional customizations, such as steel flat, low-profile, or wet-set caps and finishes including galvanized, powder coated, and primed and painted with various custom colors to choose from at no extra charge.

Bollards Plus 8-inch, 96-inch tall Extra Heavy Duty Inground Bollards are cost-effective barriers that are outstanding for shielding transformers, equipment, and machinery, providing a tall barrier that emphasizes critical safety precautions to environments that have large vehicles in operation. Traditionally, these Extra Strong Schedule 80 Carbon Steel bollards are filled with concrete upon installation to maximize their strength and deliver enhanced protection while reducing damage risks. Our bollards feature a Bare Steel finish that makes it easy to upgrade their appeal with 9” Stainless Steel or HDPE Plastic bollard covers or display their natural rustic finish for a simple and low-profile look. Additionally, we offer several customizable features such as accessories including reflective tape and single or double welded chain loops and different finishes and cap styles to select from, ensuring that no details are missed or overlooked to exceed meet requirements.

Bollards Plus 12”x2”x84” Rectangular Inground Sign Bollards deliver dependable protection to storefronts and parking lots while properly labeling designated areas such as Handicap and ADA parking zones (sign sold separately). Fabricated from Carbon Steel with a .188" wall thickness, these bollards are installed in concrete 12-inches to 24-inches below ground to maximize resilience and come equipped with a welded steel flat cap to enhance overall appearance. Blasted for improved paint adherence, each bollard is primed and glossed using our Epoxy Urethane Paint System and painted with a High Visibility Safety Yellow finish to help establish clear boundaries that allow easy communication with the surrounding environment. To best suit individual need and any project design, we offer additional customizations such as different cap style choices like a wet-set cap or no cap, galvanized, bare, and powder coated finishes, and the option to predrill 1/4" holes to accommodate any 12” premade or custom sign, ensuring that your vision is upheld and all protection necessities are met.

Bollards Plus 12”x2”x84” Rectangular Inground Sign Bollards deliver dependable protection to storefronts and parking lots while properly labeling designated areas such as ADA and van accessible parking zones (sign sold separately). Fabricated from Carbon Steel with a .188" wall thickness, these bollards are installed in concrete 12-inches to 24-inches below ground to maximize resilience and come equipped with a welded steel flat cap to enhance overall appearance. Blasted for improved paint adherence, each bollard is primed and glossed using our Epoxy Urethane Paint System and painted with a Metallic Silver finish to help establish clear boundaries that allow easy communication with the surrounding environment. To best suit individual need and any project design, we offer additional customizations such as different cap style choices like a wet-set cap or no cap, galvanized, bare, and powder coated finishes, and the option to predrill 1/4" holes to accommodate any 12” premade or custom sign, ensuring that your vision is upheld and all protection necessities are met.

Ideal for highlighting ADA handicap and van accessible parking areas (sign sold separately), our 12”x2”x96” Rectangular Inground Bollards provide a versatile solution to help guide moving traffic. These bollards are manufactured from Carbon Steel with a .188" wall thickness and can be installed in concrete 12-inches to 24-inches below ground to reinforce their stability and impact resistance. Featuring a welded steel flat cap, each bollard is prepped using our Epoxy Urethane Paint System and painted with a High Visibility Safety Yellow to ensure a low maintenance finish that visibly marks necessary safety parameters while alerting pedestrians and vehicles to their surroundings. If our default Safety Yellow does not suit your project requirements, we offer many colors at no added cost as well as additional customizable options like different cap styles, powder coat, bare, or galvanized finishes, and premade or custom signage. Whether you are establishing boundaries or communicating with traffic, these bollards deliver both aspects without compromise, ensuring that no detail is missed or overlooked.

Ideal for highlighting ADA handicap and van accessible parking areas (sign sold separately), our 12”x2”x96” Rectangular Inground Bollards provide a versatile solution to help guide moving traffic. These bollards are manufactured from Carbon Steel with a .188" wall thickness and can be installed in concrete 12-inches to 24-inches below ground to reinforce their stability and impact resistance. Featuring a welded steel flat cap, each bollard is prepped using our Epoxy Urethane Paint System and painted with a Metallic Silver to ensure a low maintenance finish that visibly marks necessary safety parameters while alerting pedestrians and vehicles to their surroundings. If our Metallic Silver does not suit your project requirements, we offer many colors at no added cost as well as additional customizable options like different cap styles, powder coat, bare, or galvanized finishes, and premade or custom signage. Whether you are establishing boundaries or communicating with traffic, these bollards deliver both aspects without compromise, ensuring that no detail is missed or overlooked.

Bollards Plus 12”x2”x108” Rectangular Inground Sign Bollards make great deterrents for areas that need to highlight and designate important zones, such as handicap and van accessible parking spaces, helping create efficient movement while minimizing the risk of injuries and property damage. Made from Carbon Steel with a .188" wall thickness, these bollards can be predrilled with 1/4" holes to mount any 12” sign, such as ADA Handicap or van accessible signs (sign sold separately), making them ideal for parking lots and parking garages. Topped with a welded steel flat cap, each bollard undergoes priming using our Epoxy Urethane Paint System and is painted with a High Visibility Safety Yellow to enhance its professional appearance. Additional customizable features such as galvanized, powder coat, or bare finishes, wet-set or no cap styles, and custom signage are available for selection. Moreover, if our Safety Yellow finish does not meet your design requirements, we offer a variety of colors at no added cost to ensure every aspect of your bollard meets necessary requirements.

Bollards Plus 12”x2”x108” Rectangular Inground Sign Bollards make great deterrents for areas that need to highlight and designate important zones, such as handicap and van accessible parking spaces, helping create efficient movement while minimizing the risk of injuries and property damage. Made from Carbon Steel with a .188" wall thickness, these bollards can be predrilled with 1/4" holes to mount any 12” sign, such as ADA Handicap or van accessible signs (sign sold separately), making them ideal for parking lots and parking garages. Topped with a welded steel flat cap, each bollard undergoes priming using our Epoxy Urethane Paint System and is painted with a Metallic Silver to enhance its professional appearance. Additional customizable features such as galvanized, powder coat, or bare finishes, wet-set or no cap styles, and custom signage are available for selection. Moreover, if our Metallic Silver finish does not meet your design requirements, we offer a variety of colors at no added cost to ensure every aspect of your bollard meets necessary requirements.

Our 12”x4”x84” Rectangular Inground Sign Bollards are cost-effective deterrents that are well-suited for business entrances and parking garages, especially those that need to inform their surroundings of ADA, van accessible, or unique designated parking areas. Made from heavy duty Carbon Steel with a .188" wall thickness, each bollard is equipped with a welded steel flat cap and can be designed to feature 1/4" predrilled holes that accommodate 12” signs (sign sold separately), allowing for a steadier flow of movement to help decrease damage risks. Blasted for paint adherence, these bollards are prepped and primed using our Epoxy Urethane Paint System and finished with an eye-catching Metallic Silver that maintains its brilliance over time. If our Metallic Silver coating does not suit your project specifications or preference, we offer many colors at no extra cost along with additional customizable aspects such as signage choices, accessories like reflective tape, and bare, powder coat, or galvanized finishes to meet safety requirements that are tailored to your needs.

These 12”x4”x96” Rectangular Inground Sign Bollards offer an effective way to establish visible boundaries while labeling designated areas to help create efficient foot and vehicle traffic. Featuring a welded steel flat cap, each bollard is fabricated from heavy duty Carbon Steel pipe with a .188" wall thickness and can be predrilled with 1/4" holes to support any 12” sign (sign sold separately), making them well-suited for highlighting ADA or van accessible parking and shielding building entrances. Using our Epoxy Urethane Paint System, our bollards are primed and glossed before painted with a Metallic Silver finish to ensure long-lasting performance that requires minimal upkeep. These bollards are fully customizable and features like no cap or wet-set cap options and galvanized, powder coat, or bare finishes are available to choose from. Additionally, if our Metallic Silver finish is not your choice of color, we offer a variety of custom colors at no extra cost to ensure all aspects of your safety deterrents are delivered exactly as requested.

Manufactured from Carbon Steel with a .188" wall thickness, our 12”x4”x108” Rectangular Inground Sign Bollards provide effective protection while offering a clear and visible solution to deliver important messages within its atmosphere. Equipped with a welded steel flat cap, each bollard is installed in concrete 12-inches to 24-inches below ground to reinforce stability and durability and has the option to accommodate any 12” sign (sign sold separately) to efficiently guide moving traffic as needed. Primed and painted using our Epoxy Urethane Paint system, our bollards are finished with a sleek, rust-free and fade-free Metallic Silver to ensure long-lasting visibility and protection. We offer a wide variety of colors to ensure that your bollards meet necessary aesthetics if our default color does not. Additional customizable options such as signage, galvanized, powder coat, or bare finishes, and accessories like reflective tape are also available to suit your needs, allowing all aspects of these bollards to be personalized to exceed safety expectations.

Perfect for equipment protection inside of factories, storefronts, and parking lots, these 4”x24”x60” U-shaped Inground Bollards (measured outside to outside) are a cost effective solution compared to standard inground bollards, delivering extended coverage to large areas due to their substantial size. These bollards are made by using two 90-degree long radius elbows to connect three 4-inch diameter Schedule 40 Carbon Steel inground bollards, creating a horseshoe-like guard rail.

Our bollards are primed and painted with our signature 4 mil High Visibility Safety Yellow and layered with a high gloss top coat using our Epoxy Urethane Paint System to create a vibrant finish that enforces boundaries and requires little maintenance. Looking for a different color? We offer a variety of custom colors through our in-house paint booth along with additional customizable features such as the option of short radius elbows and interchangeable pipe diameters.

These 4”x36”x48” (measured outside to outside) U-Shaped Inground Bollards offer a wide protection zone to enforce necessary safety parameters for areas such as parking garages, powerplants, and warehouses, while reducing the need for multiple single-post barriers. Our bollards are made from three 4-inch diameter Heavy Duty Schedule 40 Steel pipes that are connected by two 90-degree long radius elbows, creating a u-shaped guardrail that provides exceptional protection due to their combined strength and durability. 

Each bollard is primed and painted a 4 mil High Visibility Safety Yellow and finished with a high gloss topcoat using our Epoxy Urethane Paint system, delivering a brilliant, low maintenance finish that ensures ongoing awareness for pedestrians and drivers. Looking for a different color? We provide many custom colors at no added cost along with additional customizable options such as schedule 80 wall thicknesses and anchor types including embed plates and nelson studs.

Bollards Plus 4”x36”x60” (measured outside to outside) U-shaped Inground Bollards are manufactured from three 4” diameter Schedule 40 Carbon Steel Pipes and connected using two 90-degree long radius elbows to create a horseshoe like guardrail that delivers outstanding protection and coverage. Ideal for safeguarding gas station islands, machinery, and storefronts, these bollards help minimize the necessity of several single-post bollards due to their substantial size and shape. 

Primed and painted a high gloss 4 mil High Visibility Safety Yellow using our Epoxy Urethane Paint System, we ensure that each bollard requires little to no maintenance while providing a rust-free and fade-free finish that reinforces essential safety zones. If our High Visibility Safety Yellow does not suit necessary specifications, custom colors are available at no extra cost through our in-house paint booth. Additionally, customizable options such as bare, galvanized, or powder coated finishes and interchangeable dimensions are available.

Our 4”x36”x72” (measured outside to outside) Heavy Duty U-shaped Inground Bollards are a great alternative to single-post bollards due to their large size and shape, making them ideal for factories, equipment protection, and sensitive areas such as columns or corners. Using two 90-degree long-radius elbows to connect three 4” diameter Schedule 40 Carbon Steel Pipes, these bollards form a horseshoe-like guardrail that defines necessary safety parameters while offering a wider range of coverage and enhanced protection. 

Blasted for paint adherence, each bollard is primed, painted our standard 4 mil High Visibility Safety Yellow, and finished with a high gloss topcoat using our Epoxy Urethane Paint System to ensure long-lasting performance that is not only radiant but low maintenance. At no added cost, we offer a variety of custom colors if our Safety Yellow does not suit project requirements. Moreover, customizable features such as pipe material type and your choice of a short-radius elbow are available to pick from.

Ideal for safeguarding loading docks, machinery, and sensitive areas such as columns, these 4”x36”x84” (measured outside to outside) U-Shaped Inground Bollards are made to provide a larger protection zone than typical single-post bollards due to their shape and size. Built from three 4” diameter Schedule 40 steel pipes that are connected by two 90-degree long radius elbows to create a reinforced horseshoe shaped guardrail, our bollards effectively define safety parameters while offering enhanced protection. 

To ensure a long-lasting, low maintenance finish, each bollard is primed and painted with a traditional, high gloss 4 mil High Visibility Safety Yellow using our Epoxy Urethane Paint System, optimizing visibility and functionality. If our traditional color does not meet necessary aesthetics, we offer any custom color at no extra cost. Moreover, additional customizable options such as Schedule 80 wall thickness and your choice of height and diameter are available for selection.

Built for maximum coverage, our 4”x36”x96” (measured outside to outside) U-Shaped Bollards offer a cost-effective alternative to standard single-post bollards, providing exceptional strength and durability while enforcing important safety parameters to decrease damage risks. Fabricated by using three 4-inch diameter, Heavy Duty Schedule 40 Carbon Steel Pipes that are connected by two 90-degree long radius elbows to shape a durable horseshoe-style guardrail, these bollards are perfect for shielding industrial zones, cargo bays, and manufacturing plants. 

Blasted for paint adherence, we prime and paint each bollard with a 4 mil High Visibility Safety Yellow and finish off with a high gloss topcoat using our Epoxy Urethane Paint system to enhance visibility and overall performance. Need a different color? We offer many custom colors with our in-house paint booth at no additional cost. We also provide many optional customizations such as galvanized, powder coat, or bare finishes and interchangeable dimensions.

Bollards Plus 4”x48”x60” (measured outside to outside) U-shaped Inground Bollards are the perfect alternatives to single-post barriers, designed to provide a large and enhanced protection zone at a competitive price. Using two 90-degree long radius elbows to connect three 4” diameter Heavy Duty Schedule 40 pipes forming a reinforced U-like guardrail, our bollards offer superior strength making them ideal for shielding restricted areas, expensive equipment, and storefronts.

Using our Epoxy Urethane Paint System, each bollard is primed and painted with our traditional 4 mil High Visibility Safety Yellow before finished with a high gloss topcoat to deliver a rust-free and fade-free finish that effectively defines and establishes boundaries. If our High Visibility Safety Yellow does not suit project requirements, custom colors are available at no extra cost through our in-house paint booth. Additionally, customizable options such as bare, galvanized, or powder coated finishes and interchangeable dimensions are available.

Perfect for warehouses, loading docks, and airport parking garages, our 4”x36”x72” (measured outside to outside) U-Shaped Inground Bollards are manufactured by using two 90-degree long radius elbows to connect three 4-inch diameter Schedule 40 Carbon Steel pipes, creating a horseshoe-like guardrail that clearly marks and enforces boundaries. These bollards deliver a wide range of coverage and reinforced protection compared to typical single-mounted bollards due to their size and combined strength. 

Each bollard is primed and painted with our traditional high gloss, 4 mil High Visibility Safety Yellow using our Epoxy Urethane Paint System, for a long-lasting, low maintenance finish that will continuously alerts pedestrians and vehicles of their surroundings. If our standard Yellow does not fit project aesthetics, we offer various custom colors at no extra charge along with several additional customizable features such as the option for Schedule 80 thick pipes and stainless steel material instead of Carbon Steel.

Our 6”x24”x60” (measured outside to outside) U-Shaped Inground Bollards are a great cost-effective solution that are designed to deliver a wider range of coverage and enhanced safety measures to single-post bollards. Using two 90-degree long radius elbows to connect three 6” diameter Schedule 40 Carbon Steel Pipes, each bollard forms a horseshoe guardrail that effectively enforces and defines clear boundaries for areas around large equipment, gas station islands, and industrial zones. 

Primed and painted a standard high gloss 4 mil High Visibility Safety Yellow using our Epoxy Urethane Paint System, these bollards provide a rust-free, fade-free finish that is easy to maintain while delivering on-going protection. If our High Visibility Safety Yellow does not meet project aesthetics, we offer various custom colors through our in-house paint booth at no extra charge. Additionally, customizable features such as different anchor types and galvanized, powder coated, and bare finishes are available upon request.

Built for maximum coverage, our 6”x36”x48” (measured outside to outside) U-Shaped Bollards offer a cost-effective alternative to standard single-post bollards, providing exceptional strength and durability while enforcing important safety parameters to decrease damage risks. Fabricated by using three 6-inch diameter, Heavy Duty Schedule 40 Carbon Steel Pipes that are connected by two 90-degree long radius elbows to shape a durable horseshoe-style guardrail, these bollards are perfect for shielding industrial zones, cargo bays, and manufacturing plants. 

Blasted for paint adherence, we prime and paint each bollard with a 4 mil High Visibility Safety Yellow and finish off with a high gloss topcoat using our Epoxy Urethane Paint system to enhance visibility and overall performance. Need a different color? We offer many custom colors with our in-house paint booth at no additional cost. We also provide many optional customizations such as galvanized, powder coat, or bare finishes and interchangeable dimensions.

Ideal for safeguarding loading docks, machinery, and sensitive areas such as columns, these 6”x36”x60” (measured outside to outside) U-Shaped Inground Bollards are made to provide a larger protection zone than typical single-post bollards due to their shape and size. Built from three 6” diameter Schedule 40 steel pipes that are connected by two 90-degree long radius elbows to create a reinforced horseshoe shaped guardrail, our bollards effectively define safety parameters while offering enhanced protection. 

To ensure a long-lasting, low maintenance finish, each bollard is primed and painted with a traditional, high gloss 4 mil High Visibility Safety Yellow using our Epoxy Urethane Paint System, optimizing visibility and functionality. If our traditional color does not meet necessary aesthetics, we offer any custom color at no extra cost. Moreover, additional customizable options such as Schedule 80 wall thickness and your choice of height and diameter are available for selection.

Bollards Plus 6”x36”x72” (measured outside to outside) U-shaped Inground Bollards are manufactured from three 6” diameter Schedule 40 Carbon Steel Pipes and connected using two 90-degree long radius elbows to create a horseshoe like guardrail that delivers outstanding protection and coverage. Ideal for safeguarding gas station islands, machinery, and storefronts, these bollards help minimize the necessity of several single-post bollards due to their substantial size and shape. 

Primed and painted a high gloss 4 mil High Visibility Safety Yellow using our Epoxy Urethane Paint System, we ensure that each bollard requires little to no maintenance while providing a rust-free and fade-free finish that reinforces essential safety zones. If our High Visibility Safety Yellow does not suit necessary specifications, custom colors are available at no extra cost through our in-house paint booth. Additionally, customizable options such as bare, galvanized, or powder coated finishes and interchangeable dimensions are available.

Our 6”x36”x84” (measured outside to outside) Heavy Duty U-shaped Inground Bollards are a great alternative to single-post bollards due to their large size and shape, making them ideal for factories, equipment protection, and sensitive areas such as columns or corners. Using two 90-degree long-radius elbows to connect three 6-inch diameter Schedule 40 Carbon Steel Pipes, these bollards form a horseshoe-like guardrail that defines necessary safety parameters while offering a wider range of coverage and enhanced protection. 

Blasted for paint adherence, each bollard is primed, painted our standard 4 mil High Visibility Safety Yellow, and finished with a high gloss topcoat using our Epoxy Urethane Paint System to ensure long-lasting performance that is not only radiant but low maintenance. At no added cost, we offer a variety of custom colors if our Safety Yellow does not suit project requirements. Moreover, customizable features such as pipe material type and your choice of a short-radius elbow are available to pick from.

These 6”x36”x96” (measured outside to outside) U-Shaped Inground Bollards offer a wide protection zone to enforce necessary safety parameters for areas such as parking garages, powerplants, and warehouses, while reducing the need for multiple single-post barriers. Our bollards are made from three 6-inch diameter Heavy Duty Schedule 40 Steel pipes that are connected by two 90-degree long radius elbows, creating a u-shaped guardrail that provides exceptional protection due to their combined strength and durability. 

Each bollard is primed and painted a 4 mil High Visibility Safety Yellow and finished with a high gloss topcoat using our Epoxy Urethane Paint system, delivering a brilliant, low maintenance finish that ensures ongoing awareness for pedestrians and drivers. Looking for a different color? We provide many custom colors at no added cost along with additional customizable options such as schedule 80 wall thicknesses and anchor types including embed plates and nelson studs.

These 6”x48”x60” (measured outside to outside) U-Shaped Inground Bollards are perfect for shielding sensitive areas such as columns or corners, storage tanks, and loading docks due to their substantial size. These bollards are made from three 6-inch diameter Heavy Duty Schedule 40 pipe bollards, connected by two 90-degree long radius elbows to create a reinforced u-shape guardrail that marks critical safety parameters and provides durable, enhanced protection due to their combined strength.

Blasted for paint adherence, each bollard is primed, painted with our traditional 4 mil High Visibility Safety Yellow, and finished with a high gloss topcoat to ensure long-lasting visibility and performance, alerting both pedestrians and drivers to their surroundings. We offer several custom colors at no added costs if our standard color does not meet necessary requirements along with customizable options such as interchangeable dimensions and the choice of 90-degree short radius elbows.

Bollards Plus 6”x48”x72” U-shaped Inground Bollards (measured outside to outside) are designed for maximum, long-lasting protection. Ideal for shielding sensitive areas such as warehouse equipment corners, and fuel storages, these bollards are built from three 6” diameter Schedule 40 Carbon Steel Pipes, connected by two 90 degree long-radius elbows to form a reinforced horseshoe shaped guardrail that offers a wider range of coverage compared to standard-single post bollards.  

Each U-shaped bollard is primed, painted with a traditional 4 mil High Visibility Safety Yellow, and finished with a high gloss topcoat using our Epoxy Urethane Paint System for a low maintenance, rust-free and fade-free finish that establishes clear boundaries. If our default color does not suit your needs, we offer custom colors at no extra charge along with additional customizable options such as galvanized, powder coated, or bare finishes and changeable heights, widths, and diameters.

Our 4”x48”x84” (measured outside to outside) U-Shaped Inground Bollards are a great cost-effective solution that are designed to deliver a wider range of coverage and enhanced safety measures to single-post bollards. Using two 90-degree long radius elbows to connect three 4” diameter Schedule 40 Carbon Steel Pipes, each bollard forms a horseshoe guardrail that effectively enforces and defines clear boundaries for areas around large equipment, gas station islands, and industrial zones. 

Primed and painted a standard high gloss 4 mil High Visibility Safety Yellow using our Epoxy Urethane Paint System, these bollards provide a rust-free, fade-free finish that is easy to maintain while delivering on-going protection. If our High Visibility Safety Yellow does not meet project aesthetics, we offer various custom colors through our in-house paint booth at no extra charge. Additionally, customizable features such as different anchor types and galvanized, powder coated, and bare finishes are available upon request.

These 4”x48”x96” (measured outside to outside) U-Shaped Inground Bollards are perfect for shielding sensitive areas such as columns or corners, storage tanks, and loading docks due to their substantial size. These bollards are made from three 4-inch diameter Heavy Duty Schedule 40 pipe bollards, connected by two 90-degree long radius elbows to create a reinforced u-shape guardrail that marks critical safety parameters and provides durable, enhanced protection due to their combined strength.

Blasted for paint adherence, each bollard is primed, painted with our traditional 4 mil High Visibility Safety Yellow, and finished with a high gloss topcoat to ensure long-lasting visibility and performance, alerting both pedestrians and drivers to their surroundings. We offer several custom colors at no added costs if our standard color does not meet necessary requirements along with customizable options such as interchangeable dimensions and the choice of 90-degree short radius elbows.

Designed with extended coverage in mind, these 6”x48”x84” U-shaped Inground Bollards (measured outside to outside) are fabricated with three 6-inch diameter, Heavy Duty Schedule 40 Inground Bollards, connected by using two 90-degree long radius elbows to create a wide u-shape guardrail that ensures defined safety parameters. Perfect for airport parking garages, industrial settings, and storage tanks, our horseshoe bollards are exceptional alternatives for durable, reinforced protection without having to purchase several traditional single-post bollards.  

Using our Epoxy Urethane Paint System, each bollard is primed and painted with our standard high gloss 4 mil High Visibility Safety Yellow to create a finish that stands out, requires little upkeep, all while delivering long-term and effective performance. We offer various colors if our standard color does not meet project specifications. Additionally, customizable features including anchor type choices and the option of Schedule 80 thick walls are available.

Perfect for equipment protection inside of factories, storefronts, and parking lots, these 6”x48”x96” U-shaped Inground Bollards (measured outside to outside) are a cost effective solution compared to standard inground bollards, delivering extended coverage to large areas due to their substantial size. These bollards are made by using two 90-degree long radius elbows to connect three 6-inch diameter Schedule 40 Carbon Steel inground bollards, creating a horseshoe-like guard rail.

Our bollards are primed and painted with our signature 4 mil High Visibility Safety Yellow and layered with a high gloss topcoat using our Epoxy Urethane Paint System to create a vibrant finish that enforces boundaries and requires little maintenance. Looking for a different color? We offer a variety of custom colors through our in-house paint booth along with additional customizable features such as the option of short radius elbows and interchangeable pipe diameters.