Bollard Plus 4” Wet-Set Steel Dome Caps are made from Carbon Steel, featuring an x-shaped mount for reinforced stability. Instead of hand-shaping a concrete cap, these caps are designed to reduce manufacturing time and help increase efficiency, allowing for a simple place and press installation in wet concrete to deliver a quick, modern, and uniform finish. Our wet-set steel dome caps are budget-friendly and versatile, offering security to any standard 4” (4.50” OD) schedule 10 or Schedule 40 Carbon Steel Pipe Bollards. Commonly primed and painted with a 4 mil High Visibility Safety Yellow using our Epoxy Urethane Paint System, our caps can be painted any color to match your bollards aesthetics, offering custom finishes such as galvanized, powder coated, or a natural bare finish if our standard cap does not comply with your projects specifications.

These 5” Wet-Set Steel Dome Caps provide an efficient alternative to hand-shaping concrete caps, reducing fabrication time for a quick and speedy delivery. The installation process is easy and effortless, simply place and press the cap directly into wet concrete for a clean and polished finish. Durable, adaptable, and affordable, each cap is made from Carbon Steel and designed with an x-shaped mount, offering enhanced stability and an extra layer of protection to any typical 5” (5.563” OD) Schedule 10 or Schedule 40 Carbon Steel Pipe Bollards. Our caps are typically primed and painted with a 4 mil High Visibility Safety Yellow using our Epoxy Urethane Paint System, but custom colors are available at no extra charge along with bare (no finish), galvanized, and powder coated finishes to match your necessary project requirements in case our standard cap does not. 

Our 6” Wet-Set Steel Dome Caps are fabricated from Carbon Steel, offering a cost-effective option that replaces the need for hand-shaping a concrete cap for a more simplistic and efficient method. These caps are designed to deliver a sleek and professional finish that is achieved with ease by placing and pressing the cap into wet concrete. Featuring an x-shaped mount for a secure placement, these caps provide an extra layer of protection to any typical 6” (6.625” OD) Schedule 10 or Schedule 40 Carbon Steel Pipe Bollards. Each cap is blasted for paint adherence and traditionally primed and painted with a 4 mil High Visibility Safety Yellow, however, they can be painted any custom color at no extra cost and customized to have a powder coated, galvanized, or bare finish, tailoring safety exactly to your needs. 

Built for ease and convenience, our 8” Wet-Set Steel Dome Caps are made from Carbon Steel, providing an affordable alternative to hand-shaping concrete caps. These caps offer a simplified installation process that involves directly placing them into wet concrete and pressing down for a sleek and refined look. Designed with an x-shaped mount to increase stability, our wet-set caps can be used for any traditional 8” (8.625” OD) Schedule 10 or Schedule 40 Carbon Steel Pipe Bollards. Blasted for paint adherence, each cap is primed and painted with a 4 mil High Visibility Safety Yellow using our Epoxy Urethane Paint System to enhance overall appearance. If these specifications do not comply with your project's requirements, we offer custom colors at no added charge through our in-house paint booth, along with custom galvanized, bare, or powder coated finishes.

Bollards Plus 4” Wet-Set Steel Flat Caps are fabricated from Carbon Steel with a .125” wall thickness, offering a cost-effective option that replaces hand-shaping a concrete cap for a more simplistic and efficient method. These caps are designed to deliver a sleek and professional finish that is achieved with ease by placing and pressing the cap into wet concrete. Featuring an x-shaped mount for a secure placement, our caps provide an extra layer of protection to any typical 4” (4.50” OD) Schedule 10 or Schedule 40 Carbon Steel Pipe Bollards. Each cap is blasted for paint adherence and traditionally primed and painted with a 4 mil High Visibility Safety Yellow, however, they can be painted any custom color at no extra cost and customized to have a powder coated, galvanized, or bare finish, tailoring safety exactly to your needs.

Built for ease and convenience, our 5” Wet-Set Steel Flat Caps are made from Carbon Steel with a .125” wall thickness, providing an affordable alternative to hand-shaping concrete caps. These caps offer a simplified installation process that involves directly placing them into wet concrete and pressing down for a sleek and refined look. Designed with an x-shaped mount to increase stability, our wet-set caps can be used for any traditional 5” (5.563” OD) Schedule 10 or Schedule 40 Carbon Steel Pipe Bollards. Blasted for paint adherence, each cap is primed and painted with a 4 mil High Visibility Safety Yellow using our Epoxy Urethane Paint System. If these specifications do not comply with your project's requirements, we offer custom colors at no added charge through our in- house paint booth, along with custom galvanized, bare, or powder coated finishes. 

These 6” Wet-Set Steel Dome Caps provide a simple and affordable alternative to hand-shaping concrete caps, reducing fabrication time for an efficient delivery. The installation process is easy and effortless, simply place and press the cap directly into wet concrete for a clean and polished finish. These caps are durable, made from Carbon Steel with a .125” wall thickness, each designed with an x-shaped mount to offer an extra, stable layer of protection for any typical 6” (6.625” OD) Schedule 10 or Schedule 40 Carbon Steel Pipe Bollards. Our caps are primed and painted with a 4 mil High Visibility Safety Yellow using our Epoxy Urethane Paint System, or they can be color matched using our in-house paint both at no extra charge, with additional bare, galvanized, and powder coated finishes available for selection, exceed any necessary project requirements.

Our 8” Wet-Set Steel Flat Caps are made from Carbon Steel with a .125” wall thickness, featuring an x-shaped mount for reinforced stability. Instead of hand-shaping a concrete cap, these caps are designed to reduce manufacturing time and help increase efficiency, allowing for a simple place and press installation in wet concrete to deliver a quick, modern, and uniform finish. Our wet-set steel flat caps are budget-friendly and versatile, offering security to any standard 8” (8.625" OD) schedule 10 or schedule 40 Carbon Steel Pipe Bollards. Commonly primed and painted with a 4 mil High Visibility Safety Yellow using our Epoxy Urethane Paint System, our caps can be painted any color to match your bollards aesthetics, offering custom finishes such as galvanized, powder coated, or a natural bare finish if our standard cap does not comply with your projects specifications.

Designed for strength and flexibility, this anchor kit is an epoxy-based adhesive that delivers exceptional performance in a wide range of temperatures and challenging conditions, applicable for both cracked and uncracked concrete. Tested in accordance with ACI 355.4, our kit is a two-part epoxy system that includes the gun, nozzle, and 22oz of adhesive, ensuring a secured and reinforced placement for wedge anchors, screw anchors, threaded rods and rebars in a downward, horizontal, or upward orientation. This adhesive is a great method of increasing security and reliability for concrete mounted safety equipment such as our bolt-down bollards that can be found around storefronts, near equipment for protection, parking garages, and manufacturing settings.

Tested in accordance with AC193, AC01, and AC322.5 for guaranteed support and reliability, our 5/8”x5” Concrete Screw Anchors undergo a custom heat-treated process and are coated with a galvanized finish, making them ideal for interior and exterior, cracked or uncracked concrete installations. Made from Carbon Steel with a thread length of 5-1/2”, our screw anchors come with 4 anchors per package and feature an undercut design to efficiently transfer the load to the base material, delivering high-level performance that can resist anywhere from 5,570lbs to 9,810lbs (pull out strength) based on concrete type. Designed for efficiency and simplicity, each anchor can be installed using a hammer drill and secured with an impact or torque wrench making them perfect for temporary applications (one-time use) and any concrete mounted safety equipment such as our Surface Mounted Bollards, ensuring a secure and reinforced placement for areas including distribution centers, manufacturing facilities, and parking garages.

Our 5/8”x6” Concrete Wedge Anchors are made from Carbon Steel with a galvanized finish and a thread length of 3-15/16”, perfect for concrete mounted safety equipment such as our Bolt-Down Bollards, ensuring a secure and reinforced placement in 3-1/4" concrete slabs and above. Tested in accordance with AC193 and AC01 for guaranteed support and reliability, our anchors are suitable for cracked and uncracked, horizontal, vertical, and overhead applications, delivering unmatched performance for high-load environments such as warehouses or factories, providing a strong-bearing anchor that can resist up to 9,025lbs (pull out strength) depending on concrete conditions. Designed for ease and simplicity, these anchors are installable with common drill bit and tool sizes, with a total of 4 anchors per package, including the anchor, washer, and nut at an affordable price.

Bollards Plus 8-3/8”x8-3/8”x2” Escutcheon Covers are made from 18 gauge Carbon Steel, providing a durable layer that encases any 8"x8"x1/2" baseplate to hide the anchors necessary for installation, helping reduce trip hazards and possible injuries. These covers offer the freedom to leave baseplates bare and enhance their appeal for a refined and sleek finish or refreshing any baseplate that has experienced wear and tear without the cost of a full replacement. Perfect for manufacturing settings, warehouses, and parking garages, our covers feature a circular hole that is sized to easily fit over the top of any 4" (4.50" OD) Surface Mounted Bollard, sliding down to the baseplate for a snug fit. Each cover is blasted for paint adherence and then primed and painted with a 4 mil High Visibility Safety Yellow using our Epoxy Urethane Paint System for a radiant finish that compliments any setting. If our default specifications do not meet your project requirements, we offer additional customizations such as bare (no finish) or powder coated finishes along with interchangeable cover dimensions.

Our 10-3/8”x10-3/8”x2” Escutcheon Covers are made from 18 gauge carbon steel, featuring a circular hole that is sized to fit over 4” (4.50 OD) Bolt-Down Bollard's and closely hug any 10"x10"x1/2" baseplate, adding a protective layer that shields the anchors required for installment, minimizing trip hazards and possible injuries. Ideal for equipment protection, traffic deterrents, and distribution zones, our Escutcheon Covers are adaptable and flexible, providing a great option to bare baseplates for a clean and polished finish or to help increase the aesthetic appeal of surface mounted bollards that are in need of a makeover without the hassle of having to replace the entire barrier. Blasted for paint adherence, each cover is primed and painted with a 4 mil High Visibility Safety Yellow using our Epoxy Urethane Paint System for a rust-resistant, fade-proof resistant coating that requires little maintenance while delivering long-lasting performance. We offer custom colors at no added charge along with customizable finishes including bare (no finish) or powder coat ensuring that all safety requirements are met.

Perfect for industrial settings, ATM’s, and crosswalks, these 10”x10”x2” Escutcheon Covers offer a versatile solution to enhance the appearance of any Surface Mounted Bollards' baseplate, offering a clean and professional finish to bare baseplates or providing a simple method of revitalizing worn down baseplates without having to purchase new barriers. Made from 18 gauge Carbon Steel, these covers are perfect for reinforcing safety by shielding the anchors necessary for mounting to avoid trip hazards and injury risks. Each cover comes with a circular hole that is sized to fit over any 6” (6.625” OD) bollard, tightly covering any 10"x10"x1/2" baseplate and allowing for an efficient installation. Primed and painted with a 4 mil High Visibility Safety Yellow using our Epoxy Urethane Paint System, these covers deliver a brilliant coat that noticeably helps define boundaries. Additionally, if our standard cover does not meet your project's specifications, we offer stainless steel covers and custom finishes such as bare (no finish) or powder coat that can showcase any custom color at no extra charge.

Installed at a minimum of 60-inches from the bottom of the sign to the ground, Bollards Plus 12”x18” Rectangular Parking Signs are the most commonly used ADA signs, perfect for highlighting designated parking spaces especially those reserved for ADA Handicap Parking and Van Accessible Spaces. These signs are designed with 3M’s reflective films and inks on long-lasting, durable aluminum, featuring rounded corners to prevent any injuries and 1/4" anchor holes so they can be mounted as soon as they are delivered. Our aluminum parking signs are guaranteed to create awareness, alerting pedestrians and drivers to their surroundings while complying with ADA requirements to meet necessary safety standards.

Bollards Plus 4”x4” Wet-Set Steel Square Caps are made from durable Carbon Steel, providing an affordable and simplified alternative to hand-shaping concrete bollard caps. Designed to help minimize fabrication time and ensure an efficient delivery, these caps provide an easy and effortless installation that is achieved by directly placing and pressing them in wet concrete, resulting in a clean and polished finish. Featuring an x-shaped mounting style for a secure placement, our caps deliver an extra layer of protection to any 4” Carbon Steel Square Tube Bollard. Traditionally, these caps are primed and painted with a High Visibility Safety Yellow using our Epoxy Urethane Paint System. However, if our standard cap does not suit your project's requirements, custom colors are available at no extra charge through our in-house paint booth along with additional custom bare, galvanized, or powder coated finishes. 

Bollards Plus 12”x2” Wet-Set Steel Rectangular Caps provide an effortless and efficient solution to hand-shaping concrete caps. Built to minimize fabrication time, these caps are made for ease and convenience, allowing for a simple installation by placing them in wet concrete and pressing down for a sleek and professional finish. Designed with an X-shaped mount for a secure placement, our caps are made from Carbon Steel offering a durable layer of security for any 12”x2” Rectangular Carbon Steel Bollard at an affordable price. Blasted for paint adherence, each cap is primed and painted a High Visibility Safety Yellow using our Epoxy Urethane Paint System. If our standard product does not comply with your projects’ specifications, these caps can be matched and painted any color at no extra charge along with additional custom bare, galvanized, or powder coated finishes to select from.

Our 12”x4” Wet-Set Steel Rectangular Caps are made from Carbon Steel, featuring an X-shaped mounting style that helps reinforce its structural integrity for increased support. Compared to hand-shaping concrete caps that take longer to fabricate and delay delivery, these caps are a cost-effective solution to reduce labor and shipping times while enhancing convenience. Designed for a swift, on-site installation, simply place and press the cap into wet concrete for a clean, modern, and uniform finish that adds an extra layer of durable protection to any 12”x4” Rectangular Carbon Steel bollard. Our caps are traditionally primed and painted with a 4 mil High Visibility Safety Yellow using our Epoxy Urethane Paint System, however, custom bare, powder coat, or galvanized finishes are available and can be painted any color at no additional cost through our in-house paint booth to match any aesthetic.