Quick Product Details

• Diameter: 4” Schedule 40 carbon steel pipe

• Height: 36” installed height

• Baseplate: 10” x 10” x 1/2” heavy steel base

• Mounting: 4 pre-drilled holes for 5/8” anchor bolts

• Cap: Fully welded steel dome cap

• Finish: Epoxy urethane coating, approx. 4 mil thickness

• Standard Color: High Visibility Safety Yellow

• Customization: Custom colors available at no additional cost

• Manufacturing: Made in Texas

• Ordering: Available to purchase online

• Availability: Typically ships next business day.

Buy the Bollards Plus 4” x 36” Heavy Duty Bolt-Down Bollard, a durable steel safety bollard designed to protect storefronts, equipment, walkways, and building entrances from vehicle intrusion.

Product Description

This product is part of the Bollards Plus Heavy Duty Bolt-Down Bollard series, designed for high-durability protection in commercial and industrial environments. Manufactured from Schedule 40 carbon steel pipe, this bolt-down bollard provides reliable protection in low-speed traffic environments while allowing for fast installation on existing concrete slabs. Each bollard is built with a welded steel dome cap and a heavy duty 10” x 10” x 1/2” baseplate, delivering significantly greater structural strength than the thinner baseplates commonly used on imported bollards. The baseplate includes four pre-drilled 3/4” mounting holes designed for 5/8” concrete anchors, allowing contractors to securely install the bollard without excavation or deep concrete footings.

Buy Direct From the Manufacturer

Bollards Plus designs and manufactures bollards in the United States and ships directly to job sites nationwide.

Quick Product Details

• Diameter: 4” Schedule 40 carbon steel pipe

• Height: 42” installed height

• Baseplate: 10” x 10” x 1/2” heavy steel base

• Mounting: 4 pre-drilled holes for 5/8” anchor bolts

• Cap: Fully welded steel dome cap

• Finish: Epoxy urethane coating, approx. 4 mil thickness

• Standard Color: High Visibility Safety Yellow

• Customization: Custom colors available at no additional cost

• Manufacturing: Made in Texas

• Ordering: Available to purchase online

• Availability: Typically ships next business day.

Buy the Bollards Plus 4” x 42” Heavy Duty Bolt-Down Bollard, a durable steel safety bollard designed to protect storefronts, equipment, walkways, and building entrances from vehicle intrusion.

Product Description

This product is part of the Bollards Plus Heavy Duty Bolt-Down Bollard series, designed for high-durability protection in commercial and industrial environments. Manufactured from Schedule 40 carbon steel pipe, this bolt-down bollard provides reliable protection in low-speed traffic environments while allowing for fast installation on existing concrete slabs. The 42-inch height provides additional above-ground visibility compared to shorter bollards, making it a strong choice for locations where improved visibility and a more noticeable physical barrier are important.

Each bollard is built with a welded steel dome cap and a heavy duty 10” x 10” x 1/2” baseplate, delivering significantly greater structural strength than the thinner baseplates commonly used on imported bollards. The baseplate includes four pre-drilled 3/4” mounting holes designed for 5/8” concrete anchors, allowing contractors to securely install the bollard without excavation or deep concrete footings.

Buy Direct From the Manufacturer

Bollards Plus designs and manufactures bollards in the United States and ships directly to job sites nationwide.

Quick Product Details

• Diameter: 4” Schedule 40 carbon steel pipe

• Height: 48” installed height

• Baseplate: 10” x 10” x 1/2” heavy steel base

• Mounting: 4 pre-drilled holes for 5/8” anchor bolts

• Cap: Fully welded steel dome cap

• Finish: Epoxy urethane coating, approx. 4 mil thickness

• Standard Color: High Visibility Safety Yellow

• Customization: Custom colors available at no additional cost

• Manufacturing: Made in Texas

• Ordering: Available to purchase online

• Availability: Typically ships next business day

Product Description

Buy the Bollards Plus 4” x 48” Heavy Duty Bolt-Down Bollard, a durable steel safety bollard designed to protect storefronts, equipment, and facility infrastructure from vehicle intrusion.

This product is part of the Bollards Plus Heavy Duty Bolt-Down Bollard series, engineered for high-durability protection in commercial and industrial environments. Manufactured from Schedule 40 carbon steel pipe, this bolt-down bollard delivers reliable protection in low-speed traffic areas while allowing for fast installation on existing concrete slabs.

The 48-inch height provides the greatest above-ground visibility of our standard 4-inch bolt-down bollards, creating a stronger visual barrier and increased driver awareness in busy environments. This added height is especially beneficial in locations where safety barriers must remain clearly visible above parked vehicles, equipment, or facility infrastructure.

Each bollard is built with a fully welded steel dome cap and a heavy-duty 10” x 10” x 1/2” baseplate, providing significantly greater structural strength than thinner baseplates commonly found on imported bollards. The baseplate includes four pre-drilled 3/4” mounting holes designed for 5/8” concrete anchors, allowing installers to securely mount the bollard without excavation or deep concrete footings.

Buy Direct From the Manufacturer

Bollards Plus designs and manufactures steel bollards in the United States and ships directly to contractors, facility managers, and job sites nationwide.

This 4” x 48” bolt-down bollard is available for purchase online. Select your preferred configuration and add the bollard to your cart to order directly from the manufacturer, or request project pricing for larger quantity orders or custom configurations.

Quick Product Details

• Diameter: 5” Schedule 40 carbon steel pipe

• Height: 36” installed height

• Baseplate: 10” x 10” x 1/2” heavy steel base

• Mounting: 4 pre-drilled holes for 5/8” anchor bolts

• Cap: Fully welded steel dome cap

• Finish: Epoxy urethane coating, approx. 4 mil thickness

• Standard Color: High Visibility Safety Yellow

• Customization: Custom colors available at no additional cost

• Manufacturing: Made in Texas

• Ordering: Available to purchase online

• Availability: Manufactured in Texas and typically ships next business day

Product Description

Buy the Bollards Plus 5” x 36” Heavy Duty Bolt-Down Bollard, a strong steel safety bollard designed for facilities that require more impact resistance than standard 4-inch bollards while maintaining a compact footprint compared to larger 6-inch barriers.

This product is part of the Bollards Plus Heavy Duty Bolt-Down Bollard series, engineered for demanding commercial and industrial environments. Manufactured from Schedule 40 carbon steel pipe, this bolt-down bollard delivers reliable protection while allowing for quick installation on existing concrete slabs.

The 5-inch diameter provides increased strength and durability compared to smaller bollards, making it a popular choice for facilities where forklifts, service vehicles, and delivery trucks operate nearby. At the same time, the slightly smaller footprint compared to 6-inch bollards allows for easier placement in tighter pedestrian areas, walkways, and storefront protection zones.

Each bollard is built with a fully welded steel dome cap and a heavy-duty 10” x 10” x 1/2” baseplate, providing greater structural strength than thinner baseplates commonly found on imported bollards. The baseplate includes four pre-drilled 3/4” mounting holes designed for 5/8” concrete anchors, allowing installers to securely mount the bollard without excavation or deep concrete footings.

Buy Direct From the Manufacturer

Bollards Plus designs and manufactures steel bollards in the United States and ships directly to contractors, facility managers, and project sites nationwide.

This 5” x 36” bolt-down bollard is available for purchase online. Select your preferred configuration and add the bollard to your cart to order directly from the manufacturer, or request project pricing for larger quantity orders or custom configurations.

Quick Product Details

• Diameter: 5” Schedule 40 carbon steel pipe

• Height: 42” installed height

• Baseplate: 10” x 10” x 1/2” heavy steel base

• Mounting: 4 pre-drilled holes for 5/8” anchor bolts

• Cap: Fully welded steel dome cap

• Finish: Epoxy urethane coating, approx. 4 mil thickness

• Standard Color: High Visibility Safety Yellow

• Customization: Custom colors available at no additional cost

• Manufacturing: Made in Texas

• Ordering: Available to purchase online

• Availability: Manufactured in Texas and typically ships next business day

Main Product Description

Buy the Bollards Plus 5” x 42” Heavy Duty Bolt-Down Bollard, a durable steel safety bollard designed for facilities that require increased visibility and stronger impact resistance than standard 4-inch bollards while maintaining a more compact footprint than larger 6-inch barriers.

This product is part of the Bollards Plus Heavy Duty Bolt-Down Bollard series, engineered for demanding commercial and industrial environments. Manufactured from Schedule 40 carbon steel pipe, this bolt-down bollard provides reliable protection while allowing for quick installation on existing concrete slabs.

The 5-inch diameter delivers greater strength than standard bollards, while the 42-inch height improves above-ground visibility, helping drivers and equipment operators recognize protected areas sooner. This combination makes the 5" x 42" bollard ideal for safety zones where both physical protection and visual awareness are important.

Each bollard is built with a fully welded steel dome cap and a heavy-duty 10” x 10” x 1/2” baseplate, delivering greater structural strength than thinner baseplates commonly found on imported bollards. The baseplate includes four pre-drilled 3/4” mounting holes designed for 5/8” concrete anchors, allowing installers to securely mount the bollard without excavation or deep concrete footings.

Buy Direct From the Manufacturer

Bollards Plus designs and manufactures steel bollards in the United States and ships directly to contractors, facility managers, and project sites nationwide.

This 5” x 42” bolt-down bollard is available for purchase online. Select your preferred configuration and add the bollard to your cart to order directly from the manufacturer, or request project pricing for larger quantity orders or custom configurations.

Quick Product Details

• Diameter: 5” Schedule 40 carbon steel pipe

• Height: 48” installed height

• Baseplate: 10” x 10” x 1/2” heavy steel base

• Mounting: 4 pre-drilled holes for 5/8” anchor bolts

• Cap: Fully welded steel dome cap

• Finish: Epoxy urethane coating, approx. 4 mil thickness

• Standard Color: High Visibility Safety Yellow

• Customization: Custom colors available at no additional cost

• Manufacturing: Made in Texas

• Ordering: Available to purchase online

• Availability: Manufactured in Texas and typically ships next business day

Main Product Description

Buy the Bollards Plus 5” x 48” Heavy Duty Bolt-Down Bollard, a durable steel safety bollard designed for facilities that require increased visibility and strong vehicle deterrence while maintaining a more compact footprint than larger diameter barriers.

This product is part of the Bollards Plus Heavy Duty Bolt-Down Bollard series, engineered for demanding commercial and industrial environments. Manufactured from Schedule 40 carbon steel pipe, this bolt-down bollard provides reliable protection while allowing for quick installation on existing concrete slabs.

The 5-inch diameter delivers greater impact resistance than standard 4-inch bollards, while the 48-inch height provides the tallest and most visible option in the 5-inch series. This increased height improves visibility for drivers of trucks, forklifts, and service vehicles, helping prevent accidental impacts in busy operational environments.

Each bollard is built with a fully welded steel dome cap and a heavy-duty 10” x 10” x 1/2” baseplate, delivering greater structural strength than thinner baseplates commonly found on imported bollards. The baseplate includes four pre-drilled 3/4” mounting holes designed for 5/8” concrete anchors, allowing installers to securely mount the bollard without excavation or deep concrete footings.

Buy Direct From the Manufacturer

Bollards Plus designs and manufactures steel bollards in the United States and ships directly to contractors, facility managers, and project sites nationwide.

This 5” x 48” bolt-down bollard is available for purchase online. Select your preferred configuration and add the bollard to your cart to order directly from the manufacturer, or request project pricing for larger quantity orders or custom configurations.

Quick Product Details

• Diameter: 6” Schedule 40 carbon steel pipe

• Height: 36” installed height

• Baseplate: 10” x 10” x 1/2” heavy steel base

• Mounting: 4 pre-drilled holes for 5/8” anchor bolts

• Cap: Fully welded steel dome cap

• Finish: Epoxy urethane coating, approx. 4 mil thickness

• Standard Color: High Visibility Safety Yellow

• Customization: Custom colors available at no additional cost

• Manufacturing: Made in Texas

• Ordering: Available to purchase online

• Availability: Typically ships next business day

Product Description

Buy the Bollards Plus 6” x 36” Heavy Duty Bolt-Down Bollard, a large-diameter steel safety bollard designed for high-traffic environments where stronger physical protection and a highly visible vehicle deterrent are required.

This product is part of the Bollards Plus Heavy Duty Bolt-Down Bollard series, engineered for demanding commercial and industrial environments. Manufactured from Schedule 40 carbon steel pipe, this bolt-down bollard delivers exceptional durability and visibility while allowing for fast installation on existing concrete slabs.

The 6-inch diameter provides significantly greater impact resistance and visual presence compared to smaller diameter bollards, making it a preferred option for high-exposure areas such as warehouse traffic lanes, storefront protection zones, loading docks, and facility entrances where vehicles operate nearby.

Each bollard is built with a fully welded steel dome cap and a heavy-duty 10” x 10” x 1/2” baseplate, delivering greater structural strength than thinner baseplates commonly found on imported bollards. The baseplate includes four pre-drilled 3/4” mounting holes designed for 5/8” concrete anchors, allowing installers to securely mount the bollard without excavation or deep concrete footings.

Buy Direct From the Manufacturer

Bollards Plus designs and manufactures steel bollards in the United States and ships directly to contractors, facility managers, and project sites nationwide.

This 6” x 36” bolt-down bollard is available for purchase online. Select your preferred configuration and add the bollard to your cart to order directly from the manufacturer, or request project pricing for larger quantity orders or custom configurations.

Quick Product Details

• Diameter: 6” Schedule 40 carbon steel pipe

• Height: 42” installed height

• Baseplate: 10” x 10” x 1/2” heavy steel base

• Mounting: 4 pre-drilled holes for 5/8” anchor bolts

• Cap: Fully welded steel dome cap

• Finish: Epoxy urethane coating, approx. 4 mil thickness

• Standard Color: High Visibility Safety Yellow

• Customization: Custom colors available at no additional cost

• Manufacturing: Made in Texas

• Ordering: Available to purchase online

• Availability: Typically ships next business day

Product Description

Buy the Bollards Plus 6” x 42” Heavy Duty Bolt-Down Bollard, a large-diameter steel safety bollard designed for high-traffic environments where strong vehicle deterrence and improved visibility are required.

This product is part of the Bollards Plus Heavy Duty Bolt-Down Bollard series, engineered for demanding commercial and industrial environments. Manufactured from Schedule 40 carbon steel pipe, this bolt-down bollard delivers exceptional durability and visibility while allowing for quick installation on existing concrete slabs.

The 6-inch diameter provides substantial impact resistance, while the 42-inch height increases above-ground visibility compared to shorter bollards, helping drivers and equipment operators identify protected areas sooner. This combination makes the 6" x 42" bollard ideal for locations where both physical protection and visual safety cues are important.

Each bollard is built with a fully welded steel dome cap and a heavy-duty 10” x 10” x 1/2” baseplate, delivering significantly greater structural strength than thinner baseplates commonly found on imported bollards. The baseplate includes four pre-drilled 3/4” mounting holes designed for 5/8” concrete anchors, allowing installers to securely mount the bollard without excavation or deep concrete footings.

Buy Direct From the Manufacturer

Bollards Plus designs and manufactures steel bollards in the United States and ships directly to contractors, facility managers, and job sites nationwide.

This 6” x 42” bolt-down bollard is available for purchase online. Select your preferred configuration and add the bollard to your cart to order directly from the manufacturer, or request project pricing for larger quantity orders or custom configurations.

Quick Product Details

• Diameter: 6” Schedule 40 carbon steel pipe

• Height: 48” installed height

• Baseplate: 10” x 10” x 1/2” heavy steel base

• Mounting: 4 pre-drilled holes for 5/8” anchor bolts

• Cap: Fully welded steel dome cap

• Finish: Epoxy urethane coating, approx. 4 mil thickness

• Standard Color: High Visibility Safety Yellow

• Customization: Custom colors available at no additional cost

• Manufacturing: Made in Texas

• Ordering: Available to purchase online

• Availability: Manufactured in Texas and typically ships next business day

Product Description

Buy the Bollards Plus 6” x 48” Heavy Duty Bolt-Down Bollard, a large-diameter steel safety bollard designed for high-traffic environments where maximum visibility and strong vehicle deterrence are required.

This product is part of the Bollards Plus Heavy Duty Bolt-Down Bollard series, engineered for demanding commercial and industrial environments. Manufactured from Schedule 40 carbon steel pipe, this bolt-down bollard delivers exceptional durability and visibility while allowing for fast installation on existing concrete slabs.

The 6-inch diameter provides excellent impact resistance, while the 48-inch height creates the tallest and most visible option in our standard 6-inch bolt-down bollard series. This added height improves visibility for drivers of trucks, forklifts, and large equipment, helping prevent accidental impacts in busy operational environments.

Each bollard is built with a fully welded steel dome cap and a heavy-duty 10” x 10” x 1/2” baseplate, delivering significantly greater structural strength than thinner baseplates commonly found on imported bollards. The baseplate includes four pre-drilled 3/4” mounting holes designed for 5/8” concrete anchors, allowing installers to securely mount the bollard without excavation or deep concrete footings.

Buy Direct From the Manufacturer

Bollards Plus designs and manufactures steel bollards in the United States and ships directly to contractors, facility managers, and project sites nationwide.

This 6” x 48” bolt-down bollard is available for purchase online. Select your preferred configuration and add the bollard to your cart to order directly from the manufacturer, or request project pricing for larger quantity orders or custom configurations.

Made in the USA our 5″×36″ Impact Guard IBC6K Bolt-Down Bollard is manufactured and engineered to meet International Building Code (IBC) 6,000lb, providing impact resistance against vehicle contact at low speeds in any direction and ensuring compliance for parking garages, building perimeters, and equipment protection.

Technical Specifications 

• Diameter: 5" (5.563" OD)

• Wall Thickness: .304" 

• Height Above Ground: 36"  

• Cap: Welded steel dome cap 

• Baseplate: 1572-Gr 50 14”x3/4” circular baseplate with (4) 3”x1/4” gussets 

• Anchors: (8) 3/4"x10-1/2" F1554-Gr 55 Anchors with AT-3G adhesive 

• Finish: Epoxy Urethane paint—High Visibility Safety Yellow (custom colors and finishes available) 

• Effective Embed: 7” 

• Concrete Substrate: ≥ 4,500 psi, thickness ≥ 12” 

• Edge/Joints: Anchors 12” from slab edges 

• Origin: Fabricated in the USA 

Why It Stands Out 

• IBC Rated 
  This IBC rating confirms that the bollard meets a standardized impact load — typically 6,000lbs applied at 27 inches above grade.

• High-Visibility, Durable Finish 
  Blasted, primed and painted with an Epoxy Urethane paint system, this bollard is finished in High Visibility Safety Yellow, resistant to fading—even under harsh sun exposure. 

• Fully Customizable 
  Adapt to project specs: different cap styles, alternative or custom colors at no extra cost, varying finishes such as powder coated, galvanized, or bare—ideal for aligning with evolving municipal or commercial needs. 

Made in the USA our 5″×42″ Impact Guard IBC6K Bolt-Down Bollard is manufactured and engineered to meet International Building Code (IBC) 6,000lb, providing impact resistance against vehicle contact at low speeds in any direction and ensuring compliance for parking garages, building perimeters, and equipment protection.

Technical Specifications 

• Diameter: 5" (5.563" OD)

• Wall Thickness: .304" 

• Height Above Ground: 42"  

• Cap: Welded steel dome cap 

• Baseplate: 1572-Gr 50 14”x3/4” circular baseplate with (4) 3”x1/4” gussets 

• Anchors: (8) 3/4"x10-1/2" F1554-Gr 55 Anchors with AT-3G adhesive 

• Finish: Epoxy Urethane paint—High Visibility Safety Yellow (custom colors and finishes available) 

• Effective Embed: 7” 

• Concrete Substrate: ≥ 4,500 psi, thickness ≥ 12” 

• Edge/Joints: Anchors 12” from slab edges 

• Origin: Fabricated in the USA 

Why It Stands Out 

• IBC Rated 
  This IBC rating confirms that the bollard meets a standardized impact load — typically 6,000lbs applied at 27 inches above grade.

• High-Visibility, Durable Finish 
  Blasted, primed and painted with an Epoxy Urethane paint system, this bollard is finished in High Visibility Safety Yellow, resistant to fading—even under harsh sun exposure. 

• Fully Customizable 
  Adapt to project specs: different cap styles, alternative or custom colors at no extra cost, varying finishes such as powder coated, galvanized, or bare—ideal for aligning with evolving municipal or commercial needs. 

Made in the USA our 5″×48″ Impact Guard IBC6K Bolt-Down Bollard is manufactured and engineered to meet International Building Code (IBC) 6,000lb, providing impact resistance against vehicle contact at low speeds in any direction and ensuring compliance for parking garages, building perimeters, and equipment protection.

Technical Specifications 

• Diameter: 5" (5.563" OD)

• Wall Thickness: .304" 

• Height Above Ground: 48"  

• Cap: Welded steel dome cap 

• Baseplate: 1572-Gr 50 14”x3/4” circular baseplate with (4) 3”x1/4” gussets 

• Anchors: (8) 3/4"x10-1/2" F1554-Gr 55 Anchors with AT-3G adhesive 

• Finish: Epoxy Urethane paint—High Visibility Safety Yellow (custom colors and finishes available) 

• Effective Embed: 7” 

• Concrete Substrate: ≥ 4,500 psi, thickness ≥ 12” 

• Edge/Joints: Anchors 12” from slab edges 

• Origin: Fabricated in the USA 

Why It Stands Out 

• IBC Rated 
  This IBC rating confirms that the bollard meets a standardized impact load — typically 6,000lbs applied at 27 inches above grade.

• High-Visibility, Durable Finish 
  Blasted, primed and painted with an Epoxy Urethane paint system, this bollard is finished in High Visibility Safety Yellow, resistant to fading—even under harsh sun exposure. 

• Fully Customizable 
  Adapt to project specs: different cap styles, alternative or custom colors at no extra cost, varying finishes such as powder coated, galvanized, or bare—ideal for aligning with evolving municipal or commercial needs. 

Fabricated from Schedule 80 Carbon Steel, this 42-inch tall by 5-inch diameter Medium Duty Bolt-Down Bollard serves as a visual deterrent in areas requiring established and clear safety parameters, protecting houses, intersections, warehouses, and factories from potential vehicle and equipment damage. Welded on a 8"x8"x1/2" thick baseplate, this bollard is secured by 5/8” anchor bolts through four 3/4" predrilled holes, ensuring a strong, durable, and affordable solution. Featuring a welded steel dome cap to prevent water accumulation, our bollards are primed and glossed a High Visibility Safety Yellow using our Epoxy Urethane Paint System to maintain their brightness and appearance throughout all weather conditions. To meet the needs and requirements of any project, we offer a variety of colors at no extra cost along with customizable add-ons such as cap styles, finish types, and chain loop accessories to provide protection and visual appeal tailored to your specifications.

Bollards Plus 42-inch tall by 4-inch in diameter Ultra Light Bolt-Down Bollard provides an outstanding visual deterrent for areas where vehicle access must be restricted such as storefronts, bikes lanes, and warehouses. Ideal for protecting and alerting vehicles of property and equipment, these bollards are constructed from Schedule 10 Carbon Steel and topped with a welded steel dome cap for a clean, professional finish. Welded with a durable 8”x8”x3/8” thick baseplate, predrilled with four 5/8” holes, these bollards are cost-effective and designed to be efficiently and easily installed in concrete using 1/2" anchor bolts to ensure long-term stability and performance. Our bollards are primed and painted with a High Visibility Safety Yellow using our Epoxy Urethane Paint System to deliver a vibrant, long-lasting finish that resists fading and demands attention for years to come. 

Bollards Plus 6"x6"x36" Corner Guard Bolt-Down Bollard is a visual deterrent with a 3/8" wall thickness, specifically designed for cornered or angled walls. Each bollard is welded on a durable 8-1/4"x3-1/4"x1/2" thick L-shaped baseplate, predrilled with 3/4" holes accommodating 5/8” anchor bolts for a secure installation. Perfect for safeguarding bay doors, these bollards help alert trucks or equipment to prevent structural damage, protecting door frames and equipment from costly impact. Our bollards are versatile and equally effective for exterior and interior applications for environments such as distribution centers, warehouses, and buildings, clearly defining boundaries and reducing the risk of chipped or broken framework. Each bollard is blasted for enhanced paint adherence and coated with a high gloss 4 mil High Visibility Safety Yellow using our Epoxy Urethane Paint System, delivering reliability that creates long-lasting awareness

Our 6"x6"x42" Corner Bolt-Down Bollards are designed to define boundaries and provide a strong visual deterrent against damage in high-risk areas near corners and angled walls. Manufactured from Carbon Steel, these bollards have a 3/8" wall thickness and are welded on a 8-1/2"x3-1/4"x1/2" thick angled baseplate and are easy to install using 5/8” anchor bolts through three 3/4” predrilled holes for durable and reinforced protection. These bollards are versatile and ideal for a variety of settings from parking lots, alerting drivers of their sensitive areas such as corners, to building entrances, helping create awareness to pedestrians and cyclists of expose pipes or structural beams that run along walls and require extra protection. Using our Epoxy Urethane Paint System, each bollard is coated with a glossy, High Visibility Safety Yellow, ensuring long-lasting rust-free and fade-free vibrance and visibility.

These 6"x6"x48" Corner Bolt-Down Bollards have a 3/8" wall thickness and are distinctive in shape making them the perfect deterrent for angled walls or corners. Our bollards are designed to act as a visual aid inside of factories to help protect and shield framework from damage that may come from forklifts or large-scale machinery. These deterrents are also useful in protecting the parameters of large-scale machinery located inside of factories as well as the corners of staircases and rails to avoid bent or broken beams that may result in injuries to employees or costly repairs. Manufactured from heavy-duty steel, these barriers have a 8-1/2"x3-1/4"x1/2" thick L-shaped carbon steel baseplate to reinforce its structure. Using our Epoxy Urethane Paint System, our bollards are primed and painted with a standard 4 mil High Visibility Safety Yellow, creating long-lasting awareness that requires little to no maintenance.

These 12”x2”x78” Rectangular Bolt-Down Sign Bollards are an outstanding and affordable way to label necessary areas with designated signs, creating awareness and alerting pedestrians and vehicles to their surroundings to reduce damage and injury risks. Welded with a 12”x12”x1/2” thick baseplate, each bollard is secured by 5/8” anchor bolts through 3/4" predrilled holes and reinforced by stiffeners to increase sturdiness and reliability. These bollards are made from Carbon Steel with a wall thickness of .188" and can feature optional 1/4" holes to mount any 12" sign (sign sold separately), making them well-suited for parking lots, crosswalks, and carports. Equipped with a welded flat cap, our bollards are blasted to maximize paint adhesion, primed and glossed using our Epoxy Urethane Paint System, and finished with a Metallic Silver to ensure a sleek, long-lasting finish, that requires minimal maintenance or upkeep. Additional customizable options such as galvanized, bare, or primed finishes, different cap styles, and signage options like ADA accessible signs are available to exceed safety requirements that are tailored to your exact needs.

Bollards Plus 12”x2”x84” Rectangular Bolt-Down Sign Bollards are effective visual deterrents that increase communication and help establish important boundaries. Made from Carbon Steel with a .188" wall thickness, each bollard comes with a welded steel flat cap and the option to mount any 12” sign (sign sold separately), such as handicap parking or van accessible signs, ensuring designated areas are properly labeled to create efficient pedestrian and vehicle movement. Mounted by 5/8” anchor bolts through 3/4" predrilled holes, these bollards are welded on a 12”x12”x1/2” thick baseplate and come with four stiffeners to increase stability. To deliver long-lasting performance, our bollards are primed using our Epoxy Urethane Paint System and finished with a Metallic Sliver coating to ensure a lifespan that remains visible and low maintenance. We offer a variety of custom colors at no extra cost and additional customizable options such as cap styles including no cap or wet-set caps, galvanized, bare, or powder coated finishes, and accessories like reflective tape to meet the aesthetics and designs of any project.

Perfect for safeguarding airport parking garages, storefronts, and cargo bays, our 4”x24”x36” (measured outside to outside) U-shaped Bolt-Down Bollards offer a wider range of coverage due to their substantial size. This bollard is made by using two 90-degree long radius elbows that connect three Heavy Duty 4” diameter Schedule 40 Carbon Steel Pipes to form a reinforced horseshoe shaped guardrail that maximizes strength and durability. Each post comes with a welded 10”x10”x1/2” baseplate, with four 3/4” predrilled holes that accommodate 5/8” anchor bolts for a secure concrete placement. 

Our bollards are primed, painted with our standard High Visibility Safety Yellow (4 mil), and finished with a high gloss topcoat using our Epoxy Urethane Paint System for a low-maintenance, rust-free and fade-free finish. If our standard color does not match necessary aesthetics, we offer many custom colors through our in-house paint booth along with additional customizable options such as interchangeable baseplate features and bare, powder coat, or galvanized finishes.

Bollards Plus 4”x36”x36” (measured outside to outside) Heavy Duty U-shaped Bolt-Down Bollards are designed for reliable protection and coverage. Built from three 4-inch diameter Schedule 40 Carbon Steel Pipes that are connected by two 90-degree long-radius elbows to create a U-shape like guardrail, these bollards provide a larger protection zone compared to standard single-post bollards. This bollard comes with two 10”x10”x1/2” baseplates that are secured into concrete using 5/8” anchor bolts through eight predrilled 3/4” holes (4 per baseplate) to ensure stability and durability, making them a great solution for equipment protection, parking lots, and industrial settings. 

Each bollard is primed and painted with our 4 mil, high gloss, High Visibility Safety Yellow using our Epoxy Urethane Paint System to ensure a brilliant, long-lasting finish that requires little maintenance. Looking for a different color? We offer several custom colors at no extra charge. Additionally, customizable features such as material type and 90-degree short radius elbows are available. 

Our 6”x24”x36” (measured outside to outside) Heavy Duty U-shaped Bolt-Down Bollards are fabricated with three 6-inch diameter Schedule 40 Steel pipes that are connected by two 90-degree long radius elbows, forming a guardrail with a durable horseshoe-like shape. Ideal for machinery protection, factories, and fuel tanks, these bollards are wider compared to single-post barriers, allowing them more coverage and enhanced durability due to their combined strength. These bollards come with two 10”x10”x1/2” baseplates, predrilled with four 3/4" holes per baseplate for a concrete installation using 5/8” anchor bolts to reinforce security and placement. 

Each bollard is primed and painted a traditional high gloss 4 mil High Visibility Safety Yellow using our Epoxy Urethane Paint System for a finish that enforces necessary safety parameters while helping reduce damage risks. We offer many custom colors if our standard color does not meet project requirements. Moreover, additional customizable features such as interchangeable bollard dimensions and Schedule 10 or 80 wall thicknesses are available.

These 6”x36”x36” (measured outside to outside) U-shaped Bolt-Down Bollards are designed for maximum coverage and security due to their horseshoe-like design, offering a great, cost-effective alternative to several single-mounted barriers. Well-suited for pedestrian walkways, manufacturing plants, and gas storage tanks, our U-Shaped bollards are made using three 6” diameter Heavy Duty Schedule 40 Steel Pipes, connected by two 90-degree long radius elbows and come with two 10”x10”1/2” welded baseplates, predrilled with four 3/4” holes (8 total) to accommodate 5/8” anchor bolts for a secure concrete installation.  

Using our Epoxy Urethane Paint System, each bollard is primed, painted with our standard 4 mil High Visibility Safety Yellow, and finished with a high gloss topcoat, ensuring a low maintenance finish that provides long-lasting protection and awareness. Need a different color? We offer custom colors at no extra charge with our in-house paint booth along with additional customizable options such as interchangeable baseplate features and bollard dimensions.

Bollards Plus 4"x36" Decorative KW Pawn Bolt-Down Bollards serve as a visual deterrent that increases curb appeal for architectural buildings, parks, and museums due to its tapered appearance and 6” decorative sphere that helps create its pawn-like figure. Made from Heavy Duty Schedule 40 Carbon Steel Pipe, our bollards come with a welded 10-1/2"x1/2" thick circular baseplate, predrilled with 3/4" holes to accommodate 5/8" anchor bolts for secure mounting. Blasted for paint adherence, each bollard is primed and painted with a 4mil Gloss Black using our Epoxy Urethane Paint System to deliver a stunning, sleek appearance that alerts pedestrians and vehicles of their environment while remaining easy to maintain and simple to replace if necessary. We offer many additional customizable options such as stainless steel pipe material and accessories including chain loop receivers, reflective tape, and gussets for reinforced protection to exceed any project requirements.

Fabricated from Schedule 40 Carbon Steel, these 4"x42" Decorative KW Pawn Bolt-Down Bollards have a tapered appearance and a 4” decorative sphere to create its pawn-like shape, offering a modern solution to the importance of defining safety parameters. Ideal for streetscapes, architectural furnishing sites, and downtown districts, this decorative bollard comes on a welded 10-1/2"x1/2” thick circular baseplate that is mounted into concrete using 5/8” anchor bolts through four 3/4" predrilled holes for reinforced stability. Using our Epoxy Urethane Paint System, these bollards are primed and painted a high gloss 4mil Gloss Black, offering long-lasting, low maintenance performance that helps enhance visibility in any environment. If our default bollard does not meet your necessary aesthetics, we offer many custom colors through our in-house paint booth at no added charge along with additional customizable finishes such as galvanized, powder coated, or bare (no finish) to select from. 

Ideal for pavilions, architectural buildings, and convention centers, our 4”x48” Decorative KW Pawn Bolt-Down Bollards are made from Heavy Duty Schedule 40 Carbon Steel, offering a professional yet stylish approach to accentuate appearances and line necessary boundaries while decreasing damage risks. To create is unique and beautiful shape, these bollards have a tapered design and a 4” decorative sphere located at the top, all welded on a 10-1/2"x1/2” thick circular baseplate that has four 3/4" predrilled holes and is secured into concrete using 5/8” anchor bolts. Primed and painted a 4mil High Gloss Black using our Epoxy Urethane Paint System, our bollards deliver a rust-free, fade-free finish that is resistant to any weather conditions while upholding their ease of use, making them quick and easy to install or replace if needed. Additionally, customizations such as interchangeable baseplate features and your choice of height are available upon request to exceed any necessary safety requirements.

Fabricated from Schedule 40 Carbon Steel, these 6"x36" Decorative KW Pawn Bolt-Down Bollards have a tapered appearance and a 6” decorative sphere to create its pawn-like shape, offering a modern solution to the importance of defining crucial safety parameters. Ideal for monuments, pavilions, and libraries, this decorative bollard comes with a welded 12-1/2"x1/2” thick circular baseplate that is mounted into concrete by 5/8” anchor bolts through four 3/4" predrilled holes for reinforced stability. Using our Epoxy Urethane Paint System, these bollards are primed and painted a high gloss 4mil Gloss Black, offering long-lasting, low maintenance performance that helps enhance visibility in any environment. If our default bollard does not meet your project’s necessary aesthetics, we offer many custom colors through our in-house paint booth at no added charge along with additional customizable finishes such as galvanized, powder coated, or bare (no finish) to select from.

Ideal for architectural businesses, statues, and memorials, our 6”x42” Decorative KW Pawn Bolt-Down Bollards are made from Heavy Duty Schedule 40 Carbon Steel, offering a professional yet stylish approach to accentuate appearances and line necessary boundaries while decreasing damage risks. To create is unique and beautiful shape, these bollards have a tapered design and a 6” decorative sphere located at the top, all welded on a 12-1/2"x1/2” thick circular baseplate that has four 3/4" predrilled holes and is secured into concrete using 5/8” anchor bolts. Primed and painted a 4mil High Gloss Black using our Epoxy Urethane Paint System, our bollards deliver a rust-free, fade-free finish that is resistant to any weather conditions while upholding their ease of use, making them quick and easy to install or replace if needed. Additionally, customizations such as interchangeable baseplate features and your choice of height are available upon request, tailoring safety exactly to your needs.

Bollards Plus 6"x48" Decorative KW Pawn Bolt-Down Bollards serve as a visual deterrent that increases curb appeal for recreational areas, landscaping, and outlet malls due to its tapered appearance and 6” decorative sphere that helps create its pawn-like figure. Made from Heavy Duty Schedule 40 Carbon Steel Pipe, our bollards come with a welded 12-1/2"x1/2" thick circular baseplate, predrilled with 3/4" holes to accommodate 5/8" anchor bolts for secure mounting. Blasted for paint adherence, each bollard is primed and painted with a 4mil Gloss Black using our Epoxy Urethane Paint System to deliver a stunning, sleek appearance that alerts pedestrians and vehicles of their environment while remaining easy to maintain and simple to replace if necessary. We offer many additional customizable options such as stainless steel pipe material and accessories including chain loop receivers, reflective tape, and gussets for reinforced protection to exceed any project requirements.