Impact Guard IBC6K - 5"x48"

Made in the USA our 5″×48″ Impact Guard IBC6K Bolt-Down Bollard is manufactured and engineered to meet International Building Code (IBC) 6,000lb, providing impact resistance against vehicle contact at low speeds in any direction and ensuring compliance for parking garages, building perimeters, and equipment protection.

Technical Specifications 

• Diameter: 5" (5.563" OD)

• Wall Thickness: .304" 

• Height Above Ground: 48"  

• Cap: Welded steel dome cap 

• Baseplate: 1572-Gr 50 14”x3/4” circular baseplate with (4) 3”x1/4” gussets 

• Anchors: (8) 3/4"x10-1/2" F1554-Gr 55 Anchors with AT-3G adhesive 

• Finish: Epoxy Urethane paint—High Visibility Safety Yellow (custom colors and finishes available) 

• Effective Embed: 7” 

• Concrete Substrate: ≥ 4,500 psi, thickness ≥ 12” 

• Edge/Joints: Anchors 12” from slab edges 

• Origin: Fabricated in the USA 

Why It Stands Out 

• IBC Rated 
  This IBC rating confirms that the bollard meets a standardized impact load — typically 6,000lbs applied at 27 inches above grade.

• High-Visibility, Durable Finish 
  Blasted, primed and painted with an Epoxy Urethane paint system, this bollard is finished in High Visibility Safety Yellow, resistant to fading—even under harsh sun exposure. 

• Fully Customizable 
  Adapt to project specs: different cap styles, alternative or custom colors at no extra cost, varying finishes such as powder coated, galvanized, or bare—ideal for aligning with evolving municipal or commercial needs.