Impact Rated Bolt-Down Bollards
When standard bollards aren’t enough, our Impact Rated Bolt-Down Bollards are built to step up. The Impact Guard IBC6K series is engineered to meet International Building Code (IBC) 6,000-lb impact requirements — commonly specified for parking garages, elevated decks, ramp perimeters, and other areas where vehicle contact must be controlled by design.
Manufactured in the USA from thick-wall structural steel with heavy baseplates and robust anchoring systems, these surface-mounted bollards are designed to absorb and disperse low-speed vehicle impact while maintaining structural integrity. Unlike lightweight imports or decorative posts, the IBC6K series is purpose-built for real-world performance in high-traffic commercial environments.
Ideal for parking structures, mixed-use developments, commercial facilities, and infrastructure applications, these bollards provide a clean, professional installation without below-grade excavation. Finished in a durable epoxy urethane coating (safety yellow standard, custom colors available), they deliver long-term corrosion resistance and visibility.
If your project calls for engineered impact performance without compromising appearance or installation flexibility, the Impact Guard IBC6K line delivers.
Impact Guard IBC6K - 5"x36"
Impact Guard IBC6K - 5"x36"
Made in the USA our 5″×36″ Impact Guard IBC6K Bolt-Down Bollard is manufactured and engineered to meet International Building Code (IBC) 6,000lb, providing impact resistance against vehicle contact at low speeds in any direction and ensuring compliance for parking garages, building perimeters, and equipment protection.
Technical Specifications
Diameter: 5" (5.563" OD)
Wall Thickness: .304"
Height Above Ground: 36"
Cap: Welded steel dome cap
Baseplate: 1572-Gr 50 14”x3/4” circular baseplate with (4) 3”x1/4” gussets
Anchors: (8) 3/4"x10-1/2" F1554-Gr 55 Anchors with AT-3G adhesive
Finish: Epoxy Urethane paint—High Visibility Safety Yellow (custom colors and finishes available)
Effective Embed: 7”
Concrete Substrate: ≥ 4,500 psi, thickness ≥ 12”
Edge/Joints: Anchors 12” from slab edges
Origin: Fabricated in the USA
Why It Stands Out
IBC Rated
This IBC rating confirms that the bollard meets a standardized impact load — typically 6,000lbs applied at 27 inches above grade.High-Visibility, Durable Finish
Blasted, primed and painted with an Epoxy Urethane paint system, this bollard is finished in High Visibility Safety Yellow, resistant to fading—even under harsh sun exposure.Fully Customizable
Adapt to project specs: different cap styles, alternative or custom colors at no extra cost, varying finishes such as powder coated, galvanized, or bare—ideal for aligning with evolving municipal or commercial needs.
Top SellerTop Seller
CustomizableCustomize
Made Here, Made BetterUSA
Color MatchColor
Impact Guard IBC6K - 5"x42"
Impact Guard IBC6K - 5"x42"
Made in the USA our 5″×42″ Impact Guard IBC6K Bolt-Down Bollard is manufactured and engineered to meet International Building Code (IBC) 6,000lb, providing impact resistance against vehicle contact at low speeds in any direction and ensuring compliance for parking garages, building perimeters, and equipment protection.
Technical Specifications
Diameter: 5" (5.563" OD)
Wall Thickness: .304"
Height Above Ground: 42"
Cap: Welded steel dome cap
Baseplate: 1572-Gr 50 14”x3/4” circular baseplate with (4) 3”x1/4” gussets
Anchors: (8) 3/4"x10-1/2" F1554-Gr 55 Anchors with AT-3G adhesive
Finish: Epoxy Urethane paint—High Visibility Safety Yellow (custom colors and finishes available)
Effective Embed: 7”
Concrete Substrate: ≥ 4,500 psi, thickness ≥ 12”
Edge/Joints: Anchors 12” from slab edges
Origin: Fabricated in the USA
Why It Stands Out
IBC Rated
This IBC rating confirms that the bollard meets a standardized impact load — typically 6,000lbs applied at 27 inches above grade.High-Visibility, Durable Finish
Blasted, primed and painted with an Epoxy Urethane paint system, this bollard is finished in High Visibility Safety Yellow, resistant to fading—even under harsh sun exposure.Fully Customizable
Adapt to project specs: different cap styles, alternative or custom colors at no extra cost, varying finishes such as powder coated, galvanized, or bare—ideal for aligning with evolving municipal or commercial needs.
CustomizableCustomizeMade Here, Made BetterUSAColor MatchColorImpact Guard IBC6K - 5"x48"
Impact Guard IBC6K - 5"x48"
Made in the USA our 5″×48″ Impact Guard IBC6K Bolt-Down Bollard is manufactured and engineered to meet International Building Code (IBC) 6,000lb, providing impact resistance against vehicle contact at low speeds in any direction and ensuring compliance for parking garages, building perimeters, and equipment protection.
Technical Specifications
Diameter: 5" (5.563" OD)
Wall Thickness: .304"
Height Above Ground: 48"
Cap: Welded steel dome cap
Baseplate: 1572-Gr 50 14”x3/4” circular baseplate with (4) 3”x1/4” gussets
Anchors: (8) 3/4"x10-1/2" F1554-Gr 55 Anchors with AT-3G adhesive
Finish: Epoxy Urethane paint—High Visibility Safety Yellow (custom colors and finishes available)
Effective Embed: 7”
Concrete Substrate: ≥ 4,500 psi, thickness ≥ 12”
Edge/Joints: Anchors 12” from slab edges
Origin: Fabricated in the USA
Why It Stands Out
IBC Rated
This IBC rating confirms that the bollard meets a standardized impact load — typically 6,000lbs applied at 27 inches above grade.High-Visibility, Durable Finish
Blasted, primed and painted with an Epoxy Urethane paint system, this bollard is finished in High Visibility Safety Yellow, resistant to fading—even under harsh sun exposure.Fully Customizable
Adapt to project specs: different cap styles, alternative or custom colors at no extra cost, varying finishes such as powder coated, galvanized, or bare—ideal for aligning with evolving municipal or commercial needs.
CustomizableCustomizeMade Here, Made BetterUSAColor MatchColor