Bollards Plus 4”x60” Removable Utility Bollards are outstanding protective barriers that conform to utility specifications required by CenterPoint, ensuring that necessary safety parameters are effectively defined to restrict unauthorized entry while allowing for easy equipment access to facilitate repairs or replacements. These bollards are best used to shield transformers, generators, and other high voltage electrical equipment, reducing injuries, damage risks, and the costly expenses associated with non-compliant, hazardous zones. Manufactured from GI Conduit, these Protective Barriers (removable) are both installed in concrete and filled with concrete for added strength, featuring a 4-inch by 60-inch-tall barrier post and a 5-inch, 30-inch-long receiver that are both Hop Dipped Galvanized. Designed with duct seals between conduits for a watertight fit, our bollards use a 1 1/2"x1 1/2"x1/4"x2” angle iron bracket with 1/4" predrilled holes to efficiently and easily lock the bollard in place for reinforced stability and security.

Bollards Plus Removable Utility Bollards are a resilient and durable form of protection that abides with the regulatory criteria set by PG&E, to ensure they are up to code and capable of enforcing necessary safety measures. Manufactured from Schedule 40 Carbon Steel with a Hot Dipped Galvanized finish, these bollards feature a 4-inch, 67-inch tall barrier post and a 5-inch, 36-inch long pipe sleeve that is equipped with a welded 1/2"x6” eye bolt to ensure it remains securely locked and protected when not in use. Our removable steel posts minimize harm and damage by lining clear safety parameters that establish a protective protocol while allowing access for necessary repairs and maintenance, ideal for protecting high voltage electrical equipment such as industrial switch gears, control panels, and transformers. Commonly filled with concrete during installation for reinforced strength and stability, each bollard comes with a galvanized press on cap and three 2-inch Yellow Outdoor Reflective Safety Tape strips that are spaced 2-inches apart for enhanced visibility. 

Bollards Plus 4”x72” Removable Utility Bollards are an outstanding barrier that complies with TEP and Trico’s mandated specifications, limiting access to dangerous areas such as high voltage equipment and electrical power units while allowing entry to facilitate repairs and maintenance when needed. Installed in concrete, these removable posts feature a 4-inch diameter by 72-inch tall Schedule 40 Carbon Steel pipe and a 5 1/2-inch by 36-inch-long permanent post that is manufactured from Schedule 80+ Carbon Steel, both predrilled with 7/8” holes 33-inches up from the bottom of the sleeve. These holes accommodate a 3/4" round stock bolt (7-inches long) that is also predrilled with a 3/8” hole to accept a lock, increasing stability and ensuring that this equipment barrier remains secured when in use or stored away. Primed and painted a sleek, Gloss Black using our Epoxy Urethane Paint System, the removable post is capped permanently with a welded steel dome cap and has five 4-inch-wide Yellow Reflective Safety Tape strips, each spaced 4-inches apart for enhanced visibility.

Our 36-inch tall and 4-inch diameter Heavy Duty Removable Bollard provides the perfect balance of strength and versatility. Ideal for cities, parks, or parking lots, this bollard can be easily removed and reinstalled to adapt to changing needs without creating extra work or mess. Manufactured from Heavy Duty Schedule 40 Carbon Steel, each bollard comes with an X-Heavy-Duty 5 1/2"x12” sleeve made from Schedule 80+ Carbon Steel. The sleeve is equipped with a 1/4" thick steel plate that is secured by 1/4-20" screw lock to keep the sleeve locked and protected when not in use while the 5/16” locking hook feature ensures that the bollard remains in place when in use to prevent unauthorized interference. For long-lasting performance, the bollard sleeve includes a 6-inch weep line and a welded steel dome cap to avoid water accumulation, reducing maintenance concerns. Blasted and prepped using our Epoxy Urethane paint system, our bollards are finished with a High Visibility Safety Yellow to enhance its visibility and maximize its safeguarding duties. Fully customizable, this bollard is tailored to meet the unique demands of any project including alternative finishes, cap style, and additional accessories, regardless of scale or setting.

Bollard Plus 42-inch tall and 4-inch diameter Heavy Duty Removable Bollards are composed of Schedule 40 Carbon Steel and engineered to perform reliably, whether in use or stored away. A 1/4-inch thick plate using a 1/4"-20 locking screw keeps the 5 1/2-inch by 12-inch Schedule 80+ Carbon Steel sleeve securely protected when it is closed and not in use. The durable, heavy-duty hinge, built to withstand frequent movement of large vehicles or equipment, allows for easy movement and installation when necessary, without hassle or extra added maintenance. To prevent water accumulation and reduce the risk of corrosion or fading, each system includes a 6-inch weep line and a welded steel dome cap. Installed in concrete, these bollards stand at an above ground height of 36-inches, providing an excellent solution for settings like farmer markets, festivals, or other public events where access may need to be adjusted or redirected. For maximum visibility, our bollards are blasted to improve paint adherence, then primed, glossed, and finished with a High Visibility Safety Yellow using our Epoxy Urethane Paint System, ensuring a fade-resistant finish that stands ups to the elements and test of time. 

Ideal for safeguarding loading docks, equipment, and restricted areas with sensitive infrastructure, these Heavy Duty Removable Bollards serve as a dependable barrier against damage and unauthorized access yet can be quickly removed to allow entry for maintenance, repairs, or the loading and unloading of larger vehicles. Made from Schedule 40 Carbon Steel, our 48-inch tall, 4-inch diameter bollard is paired with a 12-inch by 5 1/2-inch Schedule 80+ Carbon Steel sleeve to ensure a stable, secure hold when it is in place. Equipped with a heavy duty hinge to allow ease of access when opening and closing, a 1/4-inch thick plate accommodating a 1/4"-20 screw lock keeps the sleeve protected when not in use while a 5/16” locking loop keeps the bollard securely in place when in use. Using our Epoxy Urethane Paint System, each bollard is blasted, primed, and finished with a brilliant High Visibility Safety Yellow. Additionally, a 6-inch weep line is built into the sleeve to reduce water buildup and a welded steel dome cap prevents water from accumulating at the top, ensuring a long-lasting, fade-resistant and rust-free finish.

Bollards Plus Heavy Duty Removable Bollards provide resilient and affordable protection, minimizing damage while enhancing safety. With a total height of 36-inches, these bollards are installed in concrete and extend 24-inches above ground, making them ideal for areas requiring flexible protection to deter unauthorized access and aid in crowd control, ensuring efficient and adaptable movement for any event. Each bollard system is constructed from Heavy Duty Schedule 40 Carbon Steel and fits into a 7 5/8” x 12” X-Heavy Duty Schedule 80 Carbon Steel sleeve. The sleeve includes a 1/4" thick locking plate with a durable hinge for easy opening and closing, a locking hook to secure the bollard in place when in use, and a plate screw to keep the cover sealed when not in use. This system also features a 6-inch integrated weep line to prevent water accumulation in the sleeve and a welded steel dome cap to keep the top clear of water and debris. This bollard is completely customizable from height to optional features such as chain loop receivers and lifting handles, guaranteed to meet the specific needs of any project.

Bollards Plus 42-inch tall, 6-inch diameter Heavy Duty Removable Bollards are built from Schedule 40 Carbon steel, making them ideal for establishing boundaries, protecting equipment, and restricting access to unauthorized areas in warehouses and factories. Their removable design allows for quick and effortless removal, providing easy access for equipment repairs, alterations, or replacements. Each bollard fits into an X-Heavy Duty Schedule 80 Carbon steel sleeve, equipped with a robust hinge capable of withstanding vehicle and machinery traffic and a 5/16” locking hook that is compatible with emergency service locks to keep the bollard firmly in place. To prevent water accumulation, the system features a 6-inch weep line and a welded steel dome cap, designed to work together to keep the bollard dry and maintain its integrity and visual appearance over time. For enhanced durability and visibility, each bollard undergoes blasting and priming with our Epoxy Urethane Paint system and finished with a High Visibility Safety Yellow. These tough coatings offer long-lasting protection and minimize maintenance while preserving the bollard’s performance and appearance.

Our 48-inch tall, 6-inch diameter Heavy Duty Removable Bollards are built to deliver expectational protection and flexibility. Constructed from Schedule 40 Carbon Steel and paired with a Schedule 80+ Carbon Steel sleeve, these bollards are well-suited for outdoor functions, theme parks, and storefront protection. They provide a high level of security while allowing for quick removal when access is needed for transporting goods, adjusting crowd flow, or when repairs and maintenance are needed. A locking hook secures the bollard in place during use to deter tampering while a 1/4-20 locking screw fastens a 1/4" thick steel plate preventing damage to the sleeve. Additional features include a welded dome cap to protect the top of the bollard, a built-in water drain line to prevent pooling in the sleeve, and a vibrant, rust-resistant High Visibility Safety Yellow finish with the use of our Epoxy Urethane Paint System. These aspects ensure your bollard remains bright, reliable, and maintenance-free, delivering security and peace of mind.