The Bollards Plus 5"x38" Stainless Steel Bollard Cover is the smarter alternative to oversized, overpriced pipe-based stainless covers. Precision-formed in our Texas facility from 18-gauge 304 stainless steel sheet, our 5" outside-diameter cover is engineered with a precise .200" gap to slip snugly over any standard 4" Schedule 10, 40, or 80 pipe bollard (4.50" OD) — no set screws required. Most "stainless pipe" covers on the market are oversized for standard pipe bollards, forcing set screws and inflated material costs; ours doesn't.

Each 5"x38" cover is finished with our signature low-profile water-shed dome cap and a #4 brushed finish for a clean, modern, architectural appearance — ideal for building entrances, streetscapes, storefronts, and parking lots. After fabrication, every cover is cleaned, brightened, and electrochemically passivated to meet and exceed ASTM A967, the industry standard for stainless passivation. That last step is what keeps the surface brilliant and rust-free in real-world conditions — and it's a step many competitors skip.

Specifications

• Cover diameter (OD): 5"

• Total height: 38"

• Fits: 4" pipe bollards, Schedule 10, 40, or 80 (4.50" OD)

• Fit / gap: .200"

• Material: 304 stainless steel sheet

• Wall thickness: 18 gauge

• Cap style: Low-profile water-shed dome

• Finish: #4 brushed, electrochemically passivated (ASTM A967)

• Made in the USA · Manufacturer: Bollards Plus

Customizable build-to-spec options: flat, slant, or dome cap · #6 brushed, mirror, or powder-coated finish · 16 gauge, Schedule 10, or Schedule 40 wall · 316 stainless for coastal/saline environments · custom heights and diameters · optional set screws.

The Bollards Plus 5"x50" Stainless Steel Bollard Cover is built for taller 4" pipe bollards where added visibility and full-height architectural impact matter — without the cost or sizing problems of pipe-formed stainless covers. Precision-formed from 18-gauge 304 stainless steel sheet, our 5" OD cover slips over any standard 4" Schedule 10, 40, or 80 pipe bollard (4.50" OD) with a precise .200" gap. The tight tolerance eliminates the set screws required by most competitors and keeps installation fast and clean.

The 50" cover height suits storefronts, shopping centers, parking lots, hospital entrances, and pedestrian-protection installations where the bollard sits taller than typical curbside posts. Each cover is finished with a low-profile water-shed dome cap and a #4 brushed finish, then cleaned, brightened, and electrochemically passivated post-fabrication to meet and exceed ASTM A967 — the difference between a stainless surface that stays brilliant and one that streaks and rusts within a season.

Specifications

• Cover diameter (OD): 5"

• Total height: 50"

• Fits: 4" pipe bollards, Schedule 10, 40, or 80 (4.50" OD)

• Fit / gap: .200"

• Material: 304 stainless steel sheet

• Wall thickness: 18 gauge

• Cap style: Low-profile water-shed dome

• Finish: #4 brushed, electrochemically passivated (ASTM A967)

• Made in the Texas· Manufacturer: Bollards Plus

Customizable build-to-spec options: flat, slant, or dome cap · #6 brushed, mirror, or powder-coated finish · 16 gauge, Schedule 10, or Schedule 40 wall · 316 stainless for coastal/saline environments · custom heights and diameters · optional set screws.

The Bollards Plus 6"x38" Stainless Steel Bollard Cover is designed to slip cleanly over any standard 5" Schedule 10, 40, or 80 pipe bollard (5.563" OD) with an engineered .169" gap. That tight tolerance is only possible because we form the cover from 18-gauge 304 stainless steel sheet rather than stainless pipe — our covers are correctly sized for actual pipe-bollard outside diameters, while pipe-based stainless covers from other manufacturers run oversized and require set screws to keep them centered.

This 5"-class cover is a popular choice for crosswalks, retail storefronts, banks, restaurant patios, and architectural sites where a sleek finished look matters. The low-profile water-shed dome cap and #4 brushed finish deliver a refined modern aesthetic, while electrochemical passivation to ASTM A967 — performed in-house after fabrication — keeps the surface brilliant and resistant to corrosion in real-world weather and de-icing exposure.

Specifications

• Cover diameter (OD): 6"

• Total height: 38"

• Fits: 5" pipe bollards, Schedule 10, 40, or 80 (5.563" OD)

• Fit / gap: .169"

• Material: 304 stainless steel sheet

• Wall thickness: 18 gauge

• Cap style: Low-profile water-shed dome

• Finish: #4 brushed, electrochemically passivated (ASTM A967)

• Made in the USA · Manufacturer: Bollards Plus

Customizable build-to-spec options: flat, slant, or dome cap · #6 brushed, mirror, or powder-coated finish · 16 gauge, Schedule 10, or Schedule 40 wall · 316 stainless for coastal/saline environments · custom heights and diameters · optional set screws.

The Bollards Plus 6"x50" Stainless Steel Bollard Cover is engineered to fit any standard 5" Schedule 10, 40, or 80 pipe bollard (5.563" OD) with a precise .169" slip-fit gap — no set screws required. Precision-formed from 18-gauge 304 stainless steel sheet rather than stainless pipe, our cover is sized for the bollard, not the other way around. That single design choice makes our covers measurably more affordable than pipe-formed alternatives while delivering a tighter, cleaner finished installation.

The 50" height makes this cover well suited to grocery store entrances, amusement parks, shopping centers, garage entrances, and any environment where bollards need to be visible and architecturally finished. The low-profile water-shed dome cap and #4 brushed finish complement modern building exteriors, and electrochemical passivation to ASTM A967 — completed after fabrication, in-house — gives the surface long-term rust resistance that brushed-only competitor covers can't match.

Specifications

• Cover diameter (OD): 6"

• Total height: 50"

• Fits: 5" pipe bollards, Schedule 10, 40, or 80 (5.563" OD)

• Fit / gap: .169"

• Material: 304 stainless steel sheet

• Wall thickness: 18 gauge

• Cap style: Low-profile water-shed dome

• Finish: #4 brushed, electrochemically passivated (ASTM A967)

• Made in the USA · Manufacturer: Bollards Plus

Customizable build-to-spec options: flat, slant, or dome cap · #6 brushed, mirror, or powder-coated finish · 16 gauge, Schedule 10, or Schedule 40 wall · 316 stainless for coastal/saline environments · custom heights and diameters · optional set screws.

The Bollards Plus 7"x38" Stainless Steel Bollard Cover is engineered to slip over any standard 6" Schedule 10, 40, or 80 pipe bollard (6.625" OD) with a tight .138" gap — the closest standard fit in our line. Because we form the cover from 18-gauge 304 stainless steel sheet rather than stainless pipe, we control the inside diameter precisely. The result is a cover that hugs the bollard, looks finished without filler trim or set screws, and costs significantly less than pipe-formed stainless competitors.

At 38" tall and 7" in outside diameter, this cover fits curbside, crosswalk, bank, shopping center, and storefront applications where 6" pipe bollards are specified for vehicle protection. The low-profile water-shed dome cap and #4 brushed finish bring a modern architectural look, while electrochemical passivation to ASTM A967 — performed in-house after fabrication — locks in long-term rust resistance and a brilliant surface that brushed-only stainless covers won't hold.

Specifications

• Cover diameter (OD): 7"

• Total height: 38"

• Fits: 6" pipe bollards, Schedule 10, 40, or 80 (6.625" OD)

• Fit / gap: .138"

• Material: 304 stainless steel sheet

• Wall thickness: 18 gauge

• Cap style: Low-profile water-shed dome

• Finish: #4 brushed, electrochemically passivated (ASTM A967)

• Made in the USA · Manufacturer: Bollards Plus

Customizable build-to-spec options: flat, slant, or dome cap · #6 brushed, mirror, or powder-coated finish · 16 gauge, Schedule 10, or Schedule 40 wall · 316 stainless for coastal/saline environments · custom heights and diameters · optional set screws.

The Bollards Plus 7"x50" Stainless Steel Bollard Cover is our top-selling stainless cover — and for good reason. It fits the most-specified bollard size in commercial construction (6" Schedule 40 pipe, 6.625" OD) with a precise .138" slip-fit gap, eliminating the set screws required by competitors who form their covers from oversized stainless pipe. Our 18-gauge 304 stainless steel sheet construction is sized for the bollard, not the available stainless pipe, so the finished installation is tighter, cleaner, and substantially less expensive.

At a full 50" of total height, this cover suits city squares, commercial facilities, store entrances, bank drive-throughs, and high-visibility curbside protection. The low-profile water-shed dome cap and #4 brushed finish elevate curb appeal, and every cover is cleaned, brightened, and electrochemically passivated post-fabrication to meet and exceed ASTM A967 — the passivation step many competitors skip and the reason brushed-only covers tea-stain and rust within their first year outdoors.

Specifications

• Cover diameter (OD): 7"

• Total height: 50"

• Fits: 6" pipe bollards, Schedule 10, 40, or 80 (6.625" OD)

• Fit / gap: .138"

• Material: 304 stainless steel sheet

• Wall thickness: 18 gauge

• Cap style: Low-profile water-shed dome

• Finish: #4 brushed, electrochemically passivated (ASTM A967)

• Made in the USA · Manufacturer: Bollards Plus

Customizable build-to-spec options: flat, slant, or dome cap · #6 brushed, mirror, or powder-coated finish · 16 gauge, Schedule 10, or Schedule 40 wall · 316 stainless for coastal/saline environments · custom heights and diameters · optional set screws.

Google Merchant Center Description

Bollards Plus 7"x50" stainless steel bollard cover, model COV-SS-6x50-4BF. Fits any standard 6" Schedule 10, 40, or 80 pipe bollard (6.625" OD) with a precise .138" slip-fit gap; set screws are not required. Manufactured in the USA from 18-gauge 304 stainless steel sheet, not pipe, for accurate sizing and lower material cost. Features a low-profile water-shed dome cap and a #4 brushed finish. Electrochemically passivated after fabrication to meet ASTM A967 for long-term corrosion resistance.

The Bollards Plus 9"x38" Stainless Steel Bollard Cover is sized for any standard 8" Schedule 10, 40, or 80 pipe bollard (8.625" OD), the heavy-duty post used to protect drive-throughs, fuel canopies, and storefronts. Our 18-gauge 304 stainless steel construction makes a cover this size dramatically more affordable than the stainless pipe alternatives that dominate the 8" category — and because we control the inside diameter to a slip-fit tolerance, set screws aren't required to keep the cover plumb and centered.

At 38" tall, this cover suits shopping malls, commercial entrances, large venues, and hospitality settings where 8" pipe bollards are specified. The low-profile water-shed dome cap and #4 brushed finish deliver a clean modern look, and every cover is electrochemically passivated after fabrication to meet and exceed ASTM A967 — the surface treatment that keeps stainless rust-free in real-world environments and that brushed-only competitor covers don't include.

Specifications

• Cover diameter (OD): 9"

• Total height: 38"

• Fits: 8" pipe bollards, Schedule 10, 40, or 80 (8.625" OD)

• Fit / gap: 138"

• Material: 304 stainless steel sheet

• Wall thickness: 18 gauge

• Cap style: Low-profile water-shed dome

• Finish: #4 brushed, electrochemically passivated (ASTM A967)

• Made in the USA · Manufacturer: Bollards Plus

Customizable build-to-spec options: flat, slant, or dome cap · #6 brushed, mirror, or powder-coated finish · 16 gauge, Schedule 10, or Schedule 40 wall · 316 stainless for coastal/saline environments · custom heights and diameters · optional set screws.

The Bollards Plus 9"x50" Stainless Steel Bollard Cover is built for the largest pipe bollards in commercial use — standard 8" Schedule 10, 40, or 80 posts (8.625" OD) — with a precise .138" slip-fit gap. At this size, pipe-formed stainless covers from competitors become extremely expensive and inevitably oversized, requiring multiple set screws just to keep them in place. Our 18-gauge 304 stainless steel sheet construction is roll-formed to a controlled inside diameter, delivering a tighter fit, a cleaner installation, and a price point that's accessible for full-perimeter protection projects.

At 50" of total height, this cover is well suited to stadiums, concert pavilions, business entrances, fuel canopies, and major retail and hospitality sites where 8" pipe bollards anchor vehicle-impact protection. The low-profile water-shed dome cap and #4 brushed finish present a sophisticated, modern surface, and electrochemical passivation to ASTM A967 — performed in-house after fabrication — keeps the stainless brilliant and corrosion-free in environments where brushed-only competitor covers would tea-stain or rust.

Specifications

• Cover diameter (OD): 9"

• Total height: 50"

• Fits: 8" pipe bollards, Schedule 10, 40, or 80 (8.625" OD)

• Fit / gap: .138"

• Material: 304 stainless steel sheet

• Wall thickness: 18 gauge

• Cap style: Low-profile water-shed dome

• Finish: #4 brushed, electrochemically passivated (ASTM A967)

• Made in the USA · Manufacturer: Bollards Plus

Customizable build-to-spec options: flat, slant, or dome cap · #6 brushed, mirror, or powder-coated finish · 16 gauge, Schedule 10, or Schedule 40 wall · 316 stainless for coastal/saline environments · custom heights and diameters · optional set screws.